Use this measurement to draw a semi-circle between point "A" and "B"
You will need: Plywood (1.9cm and 0.9cm thick). You will need the 1.9cm thick plywood (in the diagram below it is labelled "3") for the side panels, and the 0.9cm (in the diagram below it is labelled "1") plywood for the ramp surface. You will also need support beams roughly 2' x 4' inches (in the diagram below it is labelled "2"). I recommend you use screws when you are building the ramp because they are much stronger than nails.
I will not describe step by step how to build a ramp. You should be able to see roughly how a ramp is constructed. I hope it gives you ideas. |
