New Dimensions of Force
The Structure of Force and Vital Secret of Action and Reaction
Home Page: Secret of Nature
Abstract: To explain winding and unwinding nature force is viewed as a
curvature transmitted from one system to another. This means we have to shift
our representation of force from a straight-line arrow to curved one directed
left to right or vice-versa. Thus, we discover that force has a choice. This
page proceeds to show that force has more dimensions, which are a necessity to
account for the diverse phenomenon of nature. Force is not created in pairs but
in two pairs. Force is discovered
to posses a recessive arm which supports the action of dominant arm. They
always exist in a fixed ratio 4:3
In the previous pages, we discovered the
fundamental particle, saw the origin of gravity, mass, charge, and force in
this particle. We noted that the fundamental particle should have some
distortion in space if it has to possess above properties. In other words, it
should have a non-equilibrium distribution of matter in the left and right
frames. Distortion of the fundamental particle in space needs the application
of external force. This led us to review force and discover a new vision of
force, where force is visualized as a winding or unwinding one. We also noted
how this winding takes place in certain quantum manner. We also noted a how
qualitative change takes place in the system before the quantum action we
observe. Let us now under stand action and reaction of the force in detail.
Every system by instinct opposes the disturbance of its equilibrium. When we wind a component, a pair of components yields to the force. However, the other six components oppose by winding in the opposite direction. The ratio of winding force and the opposition to it is 1:3. This means that no winding can take place. Here if we imagine force producing and force receiving system are equal [non existing case] the opposing force acts at right angles to the direction of force [recall the concept of vertically opposite and directly opposite] see fig.- 15 [ if he figure is not opening click here sfig-15
If we take the case, where the force producing and force receiving system are in the ratio of 4:3, then the action and reaction force becomes 2:3. The opposing force here acts at 67.5 degrees thus oppose the acting force. [See fig – 17, If the figure is not opening click here- sfig-17]. This also means that the winding cannot take place. [Recall the principles of opposite] If we think of a 5:3 ratio it invariably means that the force is beyond the maximum limit of angle of interaction, therefore no action can take place. [See fig –16 , if the figure is not opening click – sfig-16 ] This leaves us in a strange situation. We need to review the concept of force and give it a new dimension such that the acting force and reacting force are equal and opposite.
New Dimension to Force:
The clue comes
from biology, where an active triplet coded gene is always is associated with
another triplet-coded gene, which is passive. We have to view force as paired ones, one passive and the
other active in the ratio 3:4. The passive force supports the action of the
active force. The angle between active
and passive force exist between two limits- maximum and minimum. The maximum is
67.5 degrees the minimum is 22.5 degrees. See fig.-18 [Click here if
the figure is not opening sfig-18 ]
We have thus discovered a new
dimension to force. That is force is created not only
pairs but in two pairs. One of this pair is recessive the other is active. See
Fig.- 19. [ click here – sfig-19 ] This I view as vital secret -2. [The first was 4:3 non-equilibrium]
One
More New Dimension to Force:
We discovered that forces
are produced not only in pairs but is accompanied by another pair, which works
passively behind the scene. Earlier while reviewing force, we noted that force
has two components a vertical and horizontal which are relative [Click to open – Reviewing Force].
In that case, we visualized that when one pair of the force increases to the
maximum the other pair decreases to the minimum. This means we have to add one
more dimension to force [In the above case, both the passive and active has to
grow simultaneously such that a pressure is built on the body on which it is
acting] Introducing the vertical component, which acts in relation to the
horizontal component invariably, means the force we experience has eight
component parts. This completes the spatial vision of force. Here we must note that the vertical and
horizontal force also exist in 4:3 ratio either in favor of vertical or horizontal.
When the system produces force on the horizontal
plane it is achieved at the cost of proportionate decrease in the vertical
plane. In other words as it acts on one plane simultaneously it receives the
reaction of the second plane. This decrease is accompanied by the changes in
the angle of these two forces. See fig- 20 [ if the figure is not opening click
sfig-20
Fig.-20: Quantum internal changes [Qualitative] leading
to final quantum action and reaction to the external world. Note the changes in the component force
and the shift from one plane to another. One must note that the system is
undergoing a twisting. Action results in when the system breaks down and reaction
results when the system spins returns to order in the new plane. The action
reaction above is mechanical one
The fallowing table - brings
out the ratio of changes taking place in the system when it produced the
horizontal force.