Sucrets^® Canon^® BP511/511A Dual Battery Holder

I read a post that described using a Sucrets^® box as a holder for 2 BP511/511A Batteries. I didn't come up with the idea, I didn't invent anything, just wanted to document it in the hopes that someone may find it useful.

Materials:

• 1 Sucrets^® Box
• 1 Sheet of Foamies^TM
• Scissors
• Instant Glue

Do whatever you like with the contents, save them for a sick day, whatever...



I found that there was a bit of play around the case, so I had a sheet of Foamies^TM and realized this is the perfect material for the job.

Take the box and press the bottom part of it into the Foamies^TM sheet and cut out around the impression made by it.
You may have to trim it a bit more, when happy with the fit, which you want to be snug, place it in the bottom. If you didn't cut too much, you won't need glue here.

Cut a final square for the lid, a bit of instant glue around the perimeter and you are all set....

Enjoy!

For some another use of that Foamies^TM material , see www.abetterbouncecard.com