KWiP Small Parts Exchange

Kelley's Works in Progress

Small Parts Exchange

Awright everyone - I'm finally going to kick this thing open and get it started! I know I've been talking about it for a bit, so here it is - the Works in Progress Small Parts Exchange!

Here's how it works:

You have small parts you don't need (something(s) under 1# and about the size of a largish paperback book or less - probably considerably smaller than both.)
It's in your way.
You probably need some other small part that you can't find easily, or would cost a mint to get.
You check the list below to see if what you want is on it (it's small now, but I hope it will grow!)
You send in the part you don't need, and ask me to send in the part you do need. First Class Post or Parcel Post each way (no need for this to get spendy, and I really don't want to make any money doing this.)

You have small parts you don't need lying about underfoot.
You don't need anything right at this moment.
You still want to help people. So...
You send me the parts you don't need anymore, I mail you a card. If you see something come up on the list you need, you email to make sure I still have it (this like will be updated approximately weekly,) and redeem your card for the part you do need.
You mail me the card First Class, I get the card back, and mail you the part.
You're happy because you scored something cheap. I'm happy because I did something to help us all out (have you seen the prices of speedo gears lately!) and we all win!

each

four

exact

Speedo Gears (this is probably going to be a big one! If it came out of a New Process transfer case that wasn't in an XJ, it will probably still work in one - so you can round those up and send them along.)
Specialty fasteners (like the all-threaded long screw under early power steering pumps for adjusting belt tension. Or CKP sensor screws, with that funky shoulder. 2 CKP screws = 1 part.)
Small parts that sometimes break - adjuster knuckles are good for this.
Oil filter adapter assemblies (or just the screw. Ever break one of those damned screws? I have!)

whole

those

do not

will not ever

13JUL2009

Item Type	Item Description	Removed From	Also Fits
Speedo Gear	35t, 1.5" Shaft (ORG)	NP231 Transfer Case	Should fit most NP231/NP242
Speedo Gear	33t, 1.5" Shaft (YEL)	NP231 Transfer Case	Should fit most NP231/NP242
Speedo Gear	29t, 3.0" Shaft (BLK)	NP231 Transfer Case	Should fit most NP231/NP242
Fuel Line Quick-Release Clip	Black (Large)	2003TJ
Fuel Line Quick-Release Clip	Black (Large)	2003TJ
Fuel Line Quick-Release Clip	Beige (Small)	2003TJ
Fuel Line Quick-Release Clip	Beige (Small)	2003TJ
Fuel Line Quick-Release Clip	Beige (Small)	2003TJ
"Jeep" Wheel Centre Cap	Black
Distributor Base Holddown Clamp		1987-1990 242ci I6	Probably fits most 1987-1999 242ci, some 150ci I4
Universal Joint Cap Straps, no screws (used)	Dye-checked and good	You supply screws (1/4"-28x1" Socket Head Capscrews)	Fits D30/D35 in XJ and MJ
Fuel Return Line Guard		1990 XJ	Should fit 1987-1990 242ci
Rear Window Wiper Arm	Paint faded in some places, will need window washer line patched	1990 XJ	Should fit 1984-1996 XJ. May fit 1997-2001XJ

contact me directly

NB

I reserve the right to ask for a deposit if you want to swap parts, and you want me to send out my part first.

will

Jon D. Kelley
Proprietor and chief Engineer
Kelley's Works in Progress

Site Navigation

Works in Progress Homepage
Works in Progress Tech Index
Works in Progress Frequently Asked Questions (FAQs)

Hosted by www.Geocities.ws