UniMotor combines with UniSafe Switchgear. It can be be arranged with three high stacked contactors in the same vertical section resulting in a substantial reduction of required dimensions. The starters are withdrawable with V-Contact vacuum contactors and medium voltage protection fuses.

Ratings
Rated voltage (kV)	12
Rated main busbar current (A)	2500
Rated short time current (kA)	31,5

UniGear type ZVC motor control is designed to be directly coupled to UniGear Type ZS1, with the possibility of extension on both sides of a switchboard. Each unit is only 325mm wide with a withdrawable single high, floor roll out contactor/fuse assembly truck. The starters are equipped with vacuum interrupters with a rating of up to 7.2kA and 400A and option for up to two fuses in parallel for each phase. The high busbar short circuit capability of 50kA makes this solution well suited for high power system requirements.

Ratings
Rated voltage (kV)	3.6 - 7.2
Rated main busbar current (A)	420
Rated short time current 3s (kA)	50