Amplifiers

Guitar and Power Amps

Nady 140 watt Mosfet preamp/amp

Rare 1987 Nady rackmount amp for guitar with 2 channels and 5 band EQ,Tube Voice emulation circuitry makes this sound like a tube amp.Independant effect loop for each channel,2 separate inputs,footswitching,bright switch,plus pre or post EQ switch assigning.2 speaker outputs.This unit is in "MINT" condition!Was purchased as old stock,so never used!! tested and works great! Price :$120.00 (+ $15 shipping)

__________________________________________________________

Peavey 6 Channel PA Head

Peavey XR-600B PA Head w/9 band Graphic EQ/Reverb/Auto compression /Aux in,Power Amp in,XLR's and 1/4 inputs ,210 Watts 4 Ohms.Used but in good condition Price : $250.00

______________________________________

VHT 50 CL and 100 CL Pittbull Heads!!

This VHT makes great guitar amps ,in the vein of Bogner and Soldano's.Handmade in California and with nice standart and optional features. We usually have at least 1 used VHT head in stock (in Great conditions)

These are usually hard to find used,but are worth the wait and usually sell new for about $1,499.00 for the 50 Watt head version.

Features:
50 Watt or 100 Watt EL34's power!
2 GT's EL34 Tubes and 1 GT 5UT4 (on 50 watt models)
Bias Adjusting switch for your choice of 6L6 or EL34's tubes
Preamp section has 4 12X7A tubes

3 position switch for either Class A or A/B operation
3 Power Amp Modes: Enhanced,Normal or Auto
2 Channels both with Gain Stacking switch (Normal or Hi Gain choice)
One of the best Direct preamp out/DI for recording that I have heard

Nice Sustain and Very Quiet Operation (no hum or hissses !!)

Paralell or Series Effect Loop
Deep Control (for even more Low end !)
Effect level/Mix control
Presence Control

Each channel has 3 switches for extra Boost /Edge/Shift
Some models we get with footswitch and some without.(but they can be ordered optionaly) .Prices start at $1,000.00 and up. Please Email us to inquire about current availability

_____________________________________

Peavey Rockmaster Tube Preamp!

This is a awesome 3 channel guitar preamp that uses 4 12AX7 tubes and gives out one of the highest gain's (called Ultra Gain) that i have ever heard on any preamp in this price range.Its really an amazing sounding unit with voice shapping ,lets you add more bass,mids/pull crunch and highs to the lead channel.nice sustain and crunch.footswitching betwen the 3 channels and 4 separate effect loops for each channel,as well as a master effect loop and 3 preamp outputs (0dB,10dB and a -10dB XLR) .If you ever heard a Enuff Znuff album ,or live show,you will know what this preamp can do,because guitarrist "Monaco" plays one!

Many Available from $200 and up

__________________________________________________________

1984 Marshall JCM 800 Mk II Head

This is a Marshall JCM 800 Model 2204 Mark 2 head 100% ORIGINAL/STOCK! NO MODs NO Nothing !!. Serial # S10211,the S on the serial number indicates that the amp was made in 1984. This amp is in great condition and 100% working condition,sounds as great as it looks.
The JCM 800 2204 is one of Marshall's great amps, a big favorite among those who love Marshall amps. Marshall added silicon op-amp parts to other models, including the later JCM 800 models with many knobs,the 2205 and 2210 and it’s been fizzy ever since.
Wonder why tech guys think the JCM 800s were built great? Pick up a JCM 800 and a JCM 900 (Marshall’s next model), and you can feel that the JCM 800 is much heavier. Why a 50 watt head? Jeff Beck, Duane Allman, Angus Young and Yngwie Malmsteen are among the list of Marshall users who prefer the 50 watt heads over the 100 watt heads.
Since the 50 watt heads use two power tubes instead of four, they crunch up faster and sound more compressed. Around 1970, Marshall stopped using the preferred Drake transformers for their 100 watt heads,but they continued using Drakes in their 50 watt heads. This head has Drake transformers (see picture below). The amp uses two 6550 tubes, which Marshall used in all United States heads from the early 1970s through the mid 1980s.
These tubes stand up well to the massive plate voltage pumped by the drake transformers.The Amp has new tubes and has been biased correctly and totally checked by authorized Marshall Tech. Use of EL34s, are possible if you desire,but you would need to re-bias the amp for optimal sound and tube life.Different tubes, need different bias settings. This unit has 3 12AX7 preamp tubes,2 speaker out's,D.I. output,4,8,16 ohms switch,triple voltage selector,2 protection fuses,high and low inputs. See pic below for details on condition.