Recipe # 3
David Lee's Loud 1776
1. | Owner | David Lee |
2. | Email Address | [email protected] |
3. | Vehicle Type | 1958 beetle |
4. | Displacement | 1776 |
5. | Crankcase | old, bored for 90.5mm cyl |
6. | Crankshaft | 69mm counterweighted |
7. | Connecting Rods | stock |
8. | Pistons&Cylinders | Mahle 90.5mm |
9. | Piston Rings | ? |
10 | Camshaft | stock |
11 | Cam gears | stock |
12 | Cam followers | aftermarket brazilian |
13 | Pushrods | stock |
14 | Cylinder Heads | stock |
15 | Rockers | stock |
16 | Spark Plugs | Bosch |
17 | Exhaust | J-tubes with 'Monza-style' exhaust, tip through stock cut-outs in apron |
18 | Compression Ratio | ? |
19 | Fuel System | 34 Pict 3 soon to be dual 40mm Kadron |
20 | Fuel Pump | stock |
21 | Oil Pump | EMPI aftermarket, with filter off to the side of the cover |
22 | Oil Sump | stock |
23 | Oil Cooler | stock |
24 | Ignition | stock |
25 | Distributor | 009 |
26 | Flywheel | stock, lightened |
27 | Pulley | stock |
28 | Clutch | stock |
29 | Pressure Plate | stock |
30 | Transmission | stock swingaxle |
31 | Wheels | 5.5" chrome steel 15" |
32 | Tires | Pirelli 195/50r15 front 205/50r15 rear |
33 | Max. Horsepower | ? |
34 | Max. Torque | ? |
35 | 0-60mph Time | ? |
36 | 1/4 mile Time | ? |
37 | Engine Mileage | 300km |
38 | Cost To Build | $1000 CDN |
39 | Purpose | weekender |
40 | Comments | Still a work in progress. The stock carb is in rough shape, takes a little while to warm up the engine. Don't have a tach, so can't tell the revs, other than it sounds loud! I'll update as time goes on. Thanks for Craig VanDam for building the engine. |