| CONSTRUCTION PHOTOGRAPHS and NOTES page 2 |
| The port side was installed with the help of Keith McLean, he is building a VACATIONER sail boat of his own. This photo shows the supports we used when we put the sides on. Care must be taken not to bend the stem out of alignment when fastening first side pannel. |
| Both sides are on and the hull is ready to be trimmed and sanded for fiberglassing. At this point you will need to deviate from the plans a little if you are going to fiberglass, ALL internal supports will need to be installed at this point. |
| Nick Heffington is using a squeegee to apply the first coat of fiberglass and is doing a good job for his first time. |
 |
 |
 |