| PC Construction Photos page 5 |
 |
| My neighbors are helping me get the boat ready to turn over so I can put fiberglass on the hull. Getting every thing ready to turn the boat was the hardest part but once we started the rolling over process it was easy. |
 |
| This blister on the hull bottom is for the bottom drain. I drilled two 1" holes in the bottom next to the Main Bulkhead and seats, this is the low point on the hull. Then I filled the holes with a mixture of epoxy and graphite. Next I will drill a 1/2" hole in each blister for a drain plug. |
 |
| The hull is being fiberglassed with 5 oz. cloth from "RAKA". |
 |
| I am building my boat with a removable top (pop-top). This photo shows the beginning of the framework. At this point I discovered that I needed to install the hatch framework and the centerboard trunk before going any futher. UP DATE The pop-top idea was later scrapped in favor of a soft top because it was too heavy. |