| Building the Stocks |
 |
|
| To build The 5 stocks you will need the flowing parts |
| 1 ea 1"X 7 1/4" pvc pipe 1 ea 1"X 5 1/4" pvc pipe 1 ea 1"X 5 1/2" pvc pipe 1 ea 1"X 4 1/4" pvc pipe 1 ea 1"X 3 1/2" pvc pipe 5 ea 3/4" copper repair cuplers |
| The 3 drone and the blowpipe Stocks are lined with a 3/4" copper cupler. Wrap the base of the cupler with tape to hold it center and fill the gap with epoxy. Make shure you get repair cuplers and not stop cuplers. |
 |
 |
 |
| The body of the stock is made from a section of 1" pvc conduite the top is cut down so that a pice of 7/8" X 1 1/4" sink drain tube will slip over the top, and a 1/4' wide slot is cut at 1/2" above the bottom of the stock |
 |