| Tracks, Parks, Trainers... |
 |
 |
 |
 |
| TRAINERS 1000MPH using log flume boats, �Infinate, loops on bobsled coaster, change weather and more... |
| SINGLE COASTERS |
 |
| PAGE [ONE] [TWO] [THREE] [FOUR] [FIVE] [SIX] |
| Technocolour Yawn Steel Rollercoaster I consider this to be one of my better designs. It has everything you would expect to find in this kind of Rollercoaster-speed, length, time, G's, drops and inversions, of which it has one. The colour is nice, and fully functioning, it can take close to 2500 peeps an hour. Ex: 6.5 Int: 6.6 Na: 3.2 �12,200 |
 |
 |
| Bladed Steel Twister Rollercoaster Bladed is 3500 feet of sharp edged steel, which pulls you 4G and lasts 1:30. The excitement is very high, even withour theming, though this reflects in the price, which is quite expensive, but if you have the money and space, this coaster is highly recommended. 3 trains of 8 cars. Ex: 7.2 Int: 7.3 Na: 4.0 �17,100 |
|
 |
| Tinted Lime Wooden Twister Rollercoaster This is probably one of my better wooden roller coasters, since I prefer to build in steel, as you get more excitement out of inversions. Although it has a high excitement, it manages to fit in a small space. You'll have to fit the exit and entrance in the spaces you can see. Max speed: 45mph. Ex: 6.7 Int: 8.4 Na: 4.6 �9,200 |
|
 |
| Overscrewed Virginia Reel Rollercoaster This virginia reel has seven of the swirly corners, which you can see it the picture. The excitement is very high for a virginia reel (you can compare it to Chris Sawyer's ones.) It takes over a minute to finish, and is 2500 feet, even though the top speed is only 30mph. Ex: 6.0 Int: 6.1 Na: 6.2 �6,700 |
|
 |
| Derailed Mine Train Rollercoaster This is one of the first few rides that I did for the site, and I think it's crap. It pulls 3G from a 45 foot, and it spins aroung a lot. There's a painfully slow bit, but that does get faster with a full load. It's rather intense, but the excitement goes up 0.5 when you build the entrance as in the pic. Ex: 6.0 Int: 8.2 Na: 5.0 �11,900 |
|
 |
| Krystal Bobsled Rollercoaster This is pretty ordinary for a bobsled coaster, due to not being able to go over crests of hills very fast. You can see most of it in the pic, and it helixes down to the platform. It does have 2 crests, but no crashing :-) Good excitement for a bobsled roller coaster. Ex: 5.5 Int: 6.1 Na: 4.5 �8,200 |
|
 |
| Flying Rats Inverted Wild Mouse Rollercoaster Not one of my better coasters sums this one up. A design flaw led me to have to put in 2 lift hills, and it has left a running cost of �300/hour, whic, thankfully, is not too high. Useful, as there are no pre-designed coasters of this type. Ex: 6.5 Int: 7.5 Na: 4.5 �4,700 |
|
 |
| End Effect Steel Corkscrew Rollercoaster Quite a large rollercoaster, featuring one vertical loop and two corkscrews. It's not too fast or high, and is long, but in my eyes, it's crap, because it has one too many lift hills-two. Expensive if you consider the excitement, but feel free to download it for its high capacity. Ex: 6.3 Int: 6.6 Na: 3.3 �11,500 |
|
 |
| Destination Suspended Single-Rail Rollercoaster Begins with the customary U turn, before climbing up the lift hill. I little speed is carried around another turn before bunnyhoping around and around the patch of land. Quite a boring rollercoaster that does its job. Ex: 5.1 Int: 6.3 Na: 4.5 �5,400 |
|
 |
| Piston Single-Rail Rollercoaster You can't really see much from the picture, but it has a small pre-ride section od 4 hops, before going up the lift hill. Followed by up and down and around and so on. Pretty much like the above rollercoaster. Not much to speak of here. Ex: 4.7 Int: 6.0 Na: 4.3 �6,100 |
|