|
If you have any tips you want to share, please email them to us.
Avoiding Bent Can Lids
Wood putty lids can often become damaged learn how to avoid that.
Band Saw Blade Storage
A easy way to store your band saw blades.
Blade Stabilizers
For a cleaner cut.
Board Feet Equivalent Charts
Charts that gives the board feet equivalents for lumber from 1" to 6" thickness' as well as lengths from 8 to 20 feet long. From About.com
Box Squaring Jig
Cabinet and carcass squaring blocks.
Calculating Board Feet
A tip for measurement of lumber volume.
Checking for router bit slippage
A slipping bit is an accident waiting to happen.
Darken Wood
Using ammonia to darken wood.
Denatured Alcohol
Use denatured alcohol as a sanding aid to improve the quality of your finished projects.
Depth Stop
Quick depth stop tip.
Don't Over-reach
Its an accident waiting to happen.
Doweling Tip
This tip will help you drive in a dowel without any problems.
Drill Press Speed Chart
how do find out the recommended operating speed for any given tool? Check out this chart.
Fastening Into End Grain
An old cabinetmaking trick.
Featherboards
How to make a Featherboard.
Fix Loose Screws
Rather than replacing the screw with a larger one, try this.
FREE Charts
From Wood Online. Includes a Drill Press Speed Chart, a Wood Screw Chart and a Lumber Sizing Chart
Easy board foot calculation.
General Woodworking Tips
From WoodWorking on the World Wide Web, by Gary Straub.
Gluing and Clamping Tips
Shop tips from Wood magazine online.
Gluing Tip - Let it Gel
"Let it Gel."
Hand Tool Safety Tips
Do's and don't from WOODtalk.
Hazardous Waste in the Shop
Disposing Of It Improperly Can Have A Negative Impact On The Environment As Well As Some Nasty Legal Consequences.
Homemade Dust Collector
This quick tip will help keep the dust down in your workshop.
How to Stop Paint Can Splatters
A quick tip to stop paint can splattering.
Keep a Clean Shop
A messy shop is an accident waiting to happen.
Lathe Safety Tips
Do's and don't from WOODtalk.
Longer Lasting Finishes
Here is a quick way to restore your can to airtight status.
Lumber Sizing Chart
Easy board foot calculation.
Magnet Pickup Trick
A quick tip for picking up small metallic parts.
Metric Conversion Chart
WoodZone.com is pleased to provide you with these handy Metric Conversion Charts and U.S. Standard Conversion Charts.
Nailing Without Split Ends
An old carpenters trick.
Power Tool Safety Tips
Do's and don't from WOODtalk.
Push Sticks
Will help you keep all of your fingers safe when working around your router table or table saw.
Quick Circular Saw Guide
A great tip for beginning woodworkers with limited tools and big ambitions.
Quick Finish Using Small Nails
Do you hate waiting for one side to dry before you can flip and finish the other side?
Repairing Damaged Veneers
Two different meathods to help you out.
Ripping Thin Strips
Can help you rip thin strips on your table saw safely.
Router Feed Direction
Are you feeding your router in the right direction?
Sanding Pad
Use this inexpensive pad to make your sanding go a lot smoother.
Sanding to an Even Surface
Make sure the surface is sanded smoothly and evenly is to mark the entire board with a pencil.
Setting Your Blade's Height
Will help you use your table saw with less risk of a serious accident.
Shelf Organizing Jigs
These simple little dividers will help you organize your workshop.
Shop Vac Tip
Use your shop vac to pick up small parts.
Spit Coat
Can help you apply an even finish by sealing the wood's grain.
Spreading Glue
Don’t use your fingers!
Squaring Up Larger Projects
Will help you square up even the largest projects.
Start Carving [How-to]
Dedicated to the designs, themes, and ideas for your next Carving project!
Stirring Paint With Your Drill
Its used to quickly and easily mix the paint for your next project.
Stop Pipe Clamp Stains
Your problems are over.
Storing Lumber
From WoodZone.com.
Stubborn Screws
A little lubricant will make the job a lot easier.
Thickness
Understanding lumber thickness.
Use a Table Saw to Groove a Dowel
A quick tip for grooving a dowel.
Wood Bleach
What you need to know about wood bleach.
The Wood Picker
Use the Wood Picker to identify candidate woods for a woodworking project. From Woodbin.com
Woodturning Pattern Tip
Masking tape on your tool-rest can easily transfer a pattern to the workpiece.
Wood Screw Chart
This chart references the gauge, head-bore size, shank-hole size, pilot-hole size.
| 
