Now you can attach the leaf spring assembly using the stock pivot bolt, and the new Calmini supplied rear shackles and bolts.
Secure the axle to the leaf springs using the supplied Calmini U-bolts. Once you have done this, you can install the dust covers on the new rear shocks, and install the rear shocks onto your vehicle.
The picture at top is pointing out another problem spot with the Calmini lift. These are the new leaf spring clamps. Use a clamp to fit these tightly to your leaf spring, and then bend the tabs down with a hammer. If you don't get it just perfect, they tend to rattle, constantly. Oh well.
Install your rear wheels, and jack the truck back down.
