Step 3:
By this step the top and the first two rows should be completed and you cube should look something like figure 1.  In this step, all we are going to do is to place the middle pieces of the bottom row in the right spot. - They don't have to be in the right orientation.  Here's how to do it:

1) Rotate the bottom row untill only one of the bottom-middle pieces is in the right position. - figure 2.  figure 2 is a view from the bottom,  I made it on purpose that you can see all of the middle colors, but it dosn't have to be like that.  It could be that some of the pieces are rotated and from this view you'd see blue.  But in this step we only care about the position.  The important thing is that only one of the middle-bottom pieces (yellow) is in the right place.  If two or three (if they are all in the right place then skip this step) are in the right spot then keep on rotating the bottom until only one is in the right place(if this is impossible then do super move right to a random bottom piece, then use super move right or left to fixed what you have wrecked now try again).

2) Keep looking at the bottom of the cube and rotate the cube untill the side that is in the right place is facing up - figure3.

3) Now look at the 3 other colors and the triangle that they make. Then check if you would have to rotate them clockwise or counter clockwise (on that triangle) to get them in the right places.  For example in this case we'd have to rotate them counter clockwise.

4) Now turn the cube forward so that the bottom (blue) is facing down and you are looking at the side that has the bottom-middle piece in the right spot (in this case the yellow side). - figure 4

5) Now for the tricky part, If you had to rotate the other bottom pieces clockwise then do super move left (what you would have done in step 2 if you would have wanted to move the bottom-middle piece up and to the right - in figure 4 that would be the bottom-yellow piece), if you had to rotate them counter clockwise the do super move right.

6) After that one of the side pieces from the middle row will have come out, so put it back in according to step two.

After this step your cube should look something like figure 5, the bottom(in figure 5 they are on top)-middle pieces should be in the right places and it dosn't matter that some of them aren't flipped the right way.
figure 1:
   figure 2: bottom view(not connected to figure 1)
               figure 3:
  figure 4:
figure 5: (view from the bottom)
Step 4
Hosted by www.Geocities.ws

1