Jason's
Off Road Golf Cart Project
April 16, 2002
The new body came today. It is a 1999 forest green body. It even came with a new bag well liner installed.
Today I put on the new spring plates. I went out and bought new grade 8 bolts. I still need to allign the front end, put in new pins, and greese everything. That will happen first thing tomorrow. Last night I finished up the rear end, making sure everything was thight. I also changed the oil/filter, fuel filter, air filter, plugs, and installed the new breather/filter. I ran it up over the highest part on the frame, back down and mounted in under the battery tray.
New Dash, Front Cowl, Rear Section. Also complete rivet kit.
I had to transfer the switch plate, as well as the serial number plates to the new dash. I used screws instead of the rivets. I did this for future assessories, switches etc. I can just pull the plate off and run wires, and install switches to the plate.
I put the new body sections on the cart. All the holes lined up perfect. Tomorrow I am going to start riveting things together. I am very happy with the way everything fit. Looks good!
Check back tomorrow for further progress and updates.
Back
Home
Next
Hosted by www.Geocities.ws

1