|
|
|
 |
|
Guitar Volume Controller
GVCA-2 rev.3 ¥65,000 ($613.21 @ 106¥/$) FOB JAPAN |
|
Download GVCA-2 Owner's Manual PDF
|
|
- The GVCA-2 is a programmable, MIDI-controllable, dual channel, voltage controlled amplifier (VCA). It can be pre-programmed with specific volume level settings on each of its two audio channels (VCAs). And it can be controlled in real-time, via MIDI Continuous Controller commands.
The GVCA-2 has 128 user programmable memory locations called "Patches." Each "patch" contains either a volume or MIDI continuous controller number for each VCA. The patches can be scrolled through manually via the front panel display controls or can be selected directly via MIDI Program Change commands. The volume and control continuous controller functions both have a volume curve that is logarithmic just as in a true mixing console audio fader.
The GVCA-2 audio channels have been designed with switch selectable operating levels allowing use with unbalanced line level as well as instrument level signals. The GVCA-2 has high impedance (1megohm) inputs allowing direct interface with guitars and other electronic instruments. The GVCA-2 can be patched into the low level signal path at the input to guitar and other amplifiers as well as in line-level effects loops. When used with guitar amplifiers, one VCA can be used at the amplifier input as a "drive" control, while the other VCA can be used in the effects loop as a "volume" control. Other applications are possible as well including effect send control, panning, and signal routing.
Foot pedal control is possible without the sound quality deterioration and noise.
CAJ AC9V adapter attachment available
|
|
While performing, the GVCA-2 remembers guitar volume control settings. |
|
Distributed by Intertune Inc., El Cerrito, CA, 94530 USA
Tel (415) 771 6426 • Fax (415) 771-8620 • [email protected]
|
