.

Build Tips

Note that as many of you will have found out, the manual negates to tell you a large number of things, amongst others they read as follows:

1. When building a de Dion chassis and using the 7,5 inch rear diff and driveshafts from a Cosworth, take note that you will have to change the left side (standing behind the car) rubber CV boot (on the diff side) for the smaller version from a drumbraked Sierra as these are smaller.  Aparently, these are a stretch to fit, but they do fit.  I will let you know when I have tried.The reason for doing this, is because the Cossie boot will otherwise make contact with the A-frame and wear through.   (Back)

2. Solution to CV bolts touching shock  (Back)
3. When installing the hubs, check and re-check the direction of the thread

                                                                                                                            Next