| Home |
Camcorders: DVD Media |
Models : Media
: MiniDVD
Hitachi DZMV380
The chart below shows the progression of camcorder (Hitachi) dvd media over
the last few years, going from a dvd-ram cartridge to the improved holder type
device which makes it easier to remove the disc for playback in a dvd player.
The camcorder models from Hitachi have also been reduced in size. The DZMV350
model is very compact, lightweight and easy to use. Anyone who has basic
knowledge of camcorder operation will easily navigate around the controls and
record/playback video using the random access disc media.
|
|
Disc Type
|
|
Compatibility
|
|
Camcorder
|
Camcorder
|
| |
Cartridge
DVD-RAM |
larger view |
mv100,
mv200,
mv230,
mv270 |
|
 |
Hitachi 1st
generation DVD model: mv100 |
| |
Caddy
DVD-R |
larger view |
mv200,
mv230,
mv270 |
|
 |
Hitachi 2nd
generation dvd models: mv200, 230, 270 |
| |
Holder
DVD-RAM
DVD-R |
 |
mv350, mv380 |
|
 |
Hitachi 3rd
generation dvd models: dzmv350,dzmv380 Panasonic VDR-M30 |
8cm miniDVD disc - Hitachi or Panasonic DVD camcorder:
The holder is a plastic top and
connected bottom flip open case for the 8cm dvd. There is a gap (open) area in the
holder that exposes the disc surface for recording and playback. The holder is
inserted into the camera slot (disc eject) on the right side of the camcorder
(opposite side of the lcd screen) oriented so that the gap area is towards the
front (lens side) of the camcorder with the gap area side of the holder towards
the camera body (disc drive). The holder comes with the disc when purchased. To
open the holder, you just press both sides of the holder in the appropriate
place and flip the cover open.
DVD-RAM Cartridge Types
( camcorders use 80mm only )
|
Case type |
Sealed case
(Non removable) |
Removable case
|
Empty case
(Caddy)
|
|
Disc |
Both |
Double
-sided |
Single
-sided |
Double
-sided |
Single
-sided |
|
120mm |
Type 1 |
Type 4 |
Type 2 |
Type 5 |
Type 3 |
|
80mm |
|
Type 6 |
Type 7 |
Type 8 |
Type
9 |
How to OPEN THE CARTRIDGE of 120mm DVD-RAM / REMOVE THE
DISC.
Follow the procedure and precautions outlined below to remove
the disc from the cartridge.
- Push and
remove the cartridge-locking pin with a sharp-tipped object, such
as a ballpoint pen.
- Open the
cover by pushing the sharp-tipped object into the gap on the left
front side of the cartridge.
1. To remove the disc:
2.
|
Do not touch the
recording surface. Fingerprints, dirt, dust and scratches on
the recording surface can destroy previously recorded data and
prevent recording of additional data. |
| 3. |
Open the cover with
care. If you damage the cover, you my not be able to close it
again. |
| 4. |
Make sure the
printed side of the shutter and the printed side of the disc
is facing the same side when returning the disc to its
cartridge. Also, note the setting of the write-protect
tab. |
| |
| 5. |
Use a felt-tipped marker to write on the label. Never
stick a new label on a disc. |
6.
|
Store only DVD-RAM disc cleaner and cleaning fluid. Do not use benzene, paint thinner or anti-static
cleaners. |
| 7. |
Always return a
disc to its cartridge for storage. |
8.
|
Clean dirty discs
only with the special DVD-RAM disc cleaner and cleaning fluid. Do not use benzene, paint thinner or
anti-static
cleaners. |
