3 Dimensional Pantograph Engraver: 55 & 55N

Standard Accessories	Extra Accessories
Spindle Collet ø4,6,8,10 mm Stylus Collet ø12,6 mm Copy Stylus 14pc Clamping Kit for Worktable 4pc Clamping Kit for Template Table 4 pc Driving Belt 1 Set Spanner 1 Set Wrench 1 Set Aligning Ruler 1 Set	Line by line Roughing Attachment Automatic Feed Attachment Roller Engraving Attachment Form Engraving Attachment Letter Type Holder Vise Electric Ethcing Equipment Machine Light Circular Working Table

Technical Data	55	55N
Motor	0.4/0.6 K.W.	0.4/0.6 K.W.
Voltage Speed (pole-changing)	220/60/3PH V/Hz 1700/3400 rpm	220/60/3PH V/Hz 1700/3400 rpm
Engraving Spindle
Speed Adjustment Rapid lift Down feed for engraving Fine adjustment Engraving capacity Collets	450 ~ 20000 rpm 28 speeds step 5 mm 7 mm 2 mm 10 mm 4,6,8,10 mm dia.	450 ~ 20000 rpm 28 speeds step 5 mm 7 mm 2 mm 10 mm 4,6,8,10 mm dia.
Pantograph
Ratio	1:1.5 ~ 1.10	1:1.5 ~ 1.10
Work Table
Clamping area Max. distance between cutter and worktable Cross travel Longitudinal travel Max. weight of workpiece	250x370 mm 310 mm 350 mm 240 mm 400 kg	320x500 mm 375 mm 360 mm 300 mm 500 kg
Master table
Clamping area Max. distance between stylus and master table Cross travel Longitudinal travel	320x500 mm 320 mm 260 mm 240 mm	420x600 mm 380 mm 280 mm 300 mm
Dimensions and weights
Approx. net weight Approx. gross weight Overall height Approx. packing case dimensions	600 kg 750 kg 1580 mm 1780x1250x1100 mm	800 kg 950 kg 1650 mm 1780x1530x1430 mm