Chevystroker (under) and Daren aka Skyman (in)
getting the tranny set in place.
With a little help from a friend-Thanks Daren! IT'S FINALLY IN!!!! Here is the long awaited 383 Stroker.
The new engine is a 350 4 bolt main block, bored .030 over, 350 (5.7) rods and a SCAT 383 stroker crankshaft. I have TRW forged flat top pistons, World Products Sportsman II heads with 2.02 1.60 stainless steel valves, screw in studs, guide plates. It has a Lunati cam 501/507 lift with duration 242/249 @ .50 and a base circle at 106 degrees to clear the rods. It has an Eldebrock RPM intake with a 750 Holley double pumper. It has A Mallory Unilite distributor and Promaster coil. I'm on the track again!
The Garage is updated and maintained by Di.
Last updated June 6, 1999.