 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Step 1 Supplies: Utillity Knife������� SuperMaxx 1500 Tape����������������� 4 four inch PVC Glue Gun Pliers Screwdriver |
| Step 2 Pry off the orange cap at the end of the gun. |
| Step Pull of the orange� thing show in the picture. |
| Step Unscrew the gun and lift off the cover. |
| Step Pull out the pump. |
| Step Drill a screw into the top of the air restrictor. |
| Step Add a hot glue around on the screw. |
| Step Unscrew the barrel. There are two screws in it so you will have to rotate the barrel. |
| Step Pry off the black cover. |
| Step Pull out the barrels. |
| Step Place the PVC pipe on top of the barrel. Then tape the PVC to the barrel. If this sounds confusing look at the picture. |
| Step Place the black cover back on the gun. |
| Step Reassemble the gun parts to look like this. |
| Step Screw the gun back together and shot away. |