Interior modifications

I stripped the whole interior incuding the wires, headliner, sound deadening material, and the surface rust on the floor pan. I made a custom fire wall since mine was cut out. I made it out of a sheet of 1/8" steel and welded it in. I also made a custom accelerator pedal mount because I had to use an RX-7 pedal and cable. I got some Sparco racing seats and used some aluminum I-beam to make a mount so I could leave the seats adjustable. I left the rear seat out and used a piece of aluminum to cover up where the seat used to be. I made a custom 4 point roll cage and welded it in. I'm now trying to fit an 87' RX-7 turbo II dash so I dont have to make one. It I'll look good and be a lot eaiser wiring everything.

  • Engine modifications
  • Making it fit
  • Body modificatins
  • Brake modificatins
  • Suspension modificatins
  • About me
  • Links

    Go back

    Hosted by www.Geocities.ws

    1