Rad for DOS  (C) 2002 Black Cat Systems. All Rights Reserved.

This is a very simple DOS version of the Rad software for the
GM-10 series detector from Black Cat Systems (please visit
http://www.blackcatsystems.com/GM/ for details). 

Connect a GM-10 to a serial port, and run the software. Toggle
through serial ports using F1 (selecting a non-existing serial
port may cause false counts to be detected). There's also an
option for random dummy data, also available using F1.

Pressing S will toggle the speaker between being on and off, when
on, an audible click is generated everytime a count is detected.

Pressing the space bar will clear the measured data, as well as
the computed values for mean, min, max, etc.

Press ESC to quit the program.

Rad for DOS is only designed for use with the GM-10 detector. It works
by counting pulses received at the serial port's data input line. 

While it may be possible to connect other detectors to your computer
and use Rad for DOS, Black Cat Systems cannot assist with any such
attempts, not be held responsible for any damage to your detector,
computer, or yourself. 


Chris Smolinski
Black Cat Systems
rad@blackcatsystems.com
http://www.blackcatsystems.com/

