| Descriptions: Servo Arm Adjusters: Someone sent me a picture of this mod, and I'm not sure who. SO...if it was you, send me an e-mail so I can give you credit. This upgrade allows you to adjust the length of the servo arms quickly with a small hex key wrench. It makes trimming the Piccolo alot easier, and less time consuming. I'm not sure what the piece is called, but you can pick it up at your local hobby store. It's used to connect pushrods to control horns, but you can use it to attach your servo arms. Then with the twist of a screw, you can loosen and tighten the arms for adjustment. Aluminum Tail Boom: Check your local hobby shop or hardware store for aluminum tubing. It's got to be 4mm internal diameter and 5mm external diameter. Just cut it to the length of the carbon boom. Aluminum Landing Skids: Again check your local hobby shop or hardware store for aluminum rods. They are 2mm in diameter. Just cut them to the length of the landing skids. |
 |