I.
About
This
tutorial will teach you how to change your ip address to any other one on your
ip range instead of having your DHCP Server pick one for you. This is very
useful because you can change your ip when you are getting DDoS'ed or if you
wish to piss off someone running a web server (or other service) on your ip
range, it is also useful to get around a bans as long as the ban only covered
your ip not your whole ip range.
As
usual anything illegal you do while reading this tutorial or after reading this
tutorial is not my fault, your actions are your own so don't blame me. I do not
claim that the things I teach are legal, so consider that everything i mention
here is illegal if you are not sure your self.
II.
Needed Information
Before
you can change your ip you need some information. This information includes your
ip range, subnet mask, default gateway, dhcp server, and dns servers.
1.
Getting your IP range - Getting information about your ip range is not
difficult, I recommend using Neo Trace on your own ip. But for our test just
look at your ip address, say it's 24.193.110.13 you can definitely use the ip's
found between 24.193.110.1 < [new ip] < 24.193.110.255, don't use x.x.x.1
or x.x.x.255. To find your ip simply open a dos/command prompt window and type
ipconfig at the prompt, look for "IP Address. . . . . . . . . . . . :
x.x.x.x".
2.
Subnet Mask, Default Gateway, DHCP Server - These are very easy to find, just
open a dos/command prompt window and type 'ipconfig /all' without the ' '. You
should see something like this:
Windows
IP Configuration
Host
Name . . . . . . . . . . . . : My Computer Name Here
Primary
Dns Suffix . . . . . . . :
Node
Type . . . . . . . . . . . . : Unknown
IP
Routing Enabled. . . . . . . . : No
WINS
Proxy Enabled. . . . . . . . : No
Ethernet
adapter Local Area Connection:
Connection-specific
DNS Suffix . : xxxx.xx.x
Description
. . . . . . . . . . . : NETGEAR FA310TX Fast Ethernet Adapter (NGRPCI)
Physical
Address. . . . . . . . . : XX-XX-XX-XX-XX-XX
Dhcp
Enabled. . . . . . . . . . . : Yes
Autoconfiguration
Enabled . . . . : Yes
IP
Address. . . . . . . . . . . . : 24.xxx.xxx.xx
Subnet
Mask . . . . . . . . . . . : 255.255.240.0
Default
Gateway . . . . . . . . . : 24.xxx.xxx.x
DHCP
Server . . . . . . . . . . . : 24.xx.xxx.xx
DNS
Servers . . . . . . . . . . . : 24.xx.xxx.xxx
24.xx.xxx.xx
24.xx.xxx.xxx
Lease
Obtained. . . . . . . . . . : Monday, January 20, 2003 4:44:08 PM
Lease
Expires . . . . . . . . . . : Tuesday, January 21, 2003 3:43:16 AM
This
is all the information you will need for now, I suggest you either keep your
dos/command prompt window open or copy & paste the information somewhere, to
copy right click the window and select text and click once.
III.
Changing your IP Address
To
change your ip address first pick any ip you like out of your ip range and
remember it or write it down. It is usually a good idea to make sure the ip is
dead (except for what we are going to do later on) so just ping it via
"ping x.x.x.x" and if it times out then you can use it. Now go to My
Computer, then Control Panel. In Control Panel select Network Connections and
pick your active connection, probably Local Area Connection or your ISP name.
Open that connection by double clicking on the icon in Network Connections, then
select Properties under the General Tab. In the new window that pops up select
Internet Protocol (TCP/IP) and click properties, it's under the general tab. In
this new window select the General tab and choose "Use the following IP
address" and for the IP address enter the ip you would like to use (the one
you picked from your subnet earlier) and for the Subnet Mask enter the subnet
mask you got when your ran ipconfig /all, same goes for the Default Gateway. Now
select "Use the following DNS server addresses" and enter the
information you got earlier. Now just click OK. Test that it worked, try to
refresh a website and if it works you know everything is okay and you are
connected. To make sure the change worked type ipconfig again and the ip address
should have changed to your new one.
IV.
DDoS & DoS Protection
If
your firewall shows that you are being ddosed, this is usually when you are
constantly getting attempted UDP connections several times a second from either
the same ip address or multiple ip addresses (ddos), you can protect your self
by changing your ip address via the method i described above.
V.
Web servers & Other Services
If
you know someone on your ip range is running a web server and he or she has
pissed you off or you just like messing around you can "steal" their
ip address so any dns going to that ip will show your site instead because you
would be running a web server your self.