Change Yr Hard Drive Number
On: Thursday, September 01
ok first off i didn't write this i got it
off another site.
Im going to tell step by step on how to
crack the N2R program (HBLG and SBE) are you guys ready ??? here
we go... 1st you have to change your HD # by using VOLID you can
find it here Code: http://www.geocities.com/jehanzeb_manzoor/volid.zip
after you dl/ded,
extracted it now and put your VOLID into
your system32 folder if you dont know how to get to your sysytem32
folder just simply follow this step START => RUN and into the
dialog box execute this command system32 now you got the sytem32
folder open and now just drag and drop the VOLID into your
system32 folder
wheww!!... i hope you guys understand so
far if not just forget the N2R BOOTERS...
you got VOLID on your system32 right !!!
now close all the folders you have open bcoz we about to do the
hardest part of this method... now chill people bcoz im going to
have a smoke lil bit...
Aiight now you guys ready to do this part
!!!! ..... lets do this
follow this step START => RUN in the
dialog box execute this command CMD now you guys see the WINDOWS
COMMAND PROMPT wheww!! now you should see C:\Document and
Settings\Users: or whatever your path is now to change your HD #
execute this command Volumeid C: XXXX-XXXX ( replace the X part
with the number you want to be your new HD # )
and hit ENTER. I think thats all you
gotta do to change your HD # and CRACKED The N2R BOOTERS
Note:Your new HD # will not change untill
you restart your computer
ps: use this HD # to make N2R BOOTERS
work 3050-0000
E424-8A52
4FEC-C37E
54D8-81B4
789C-3C2E
Good Luck
{}P3@C3{}
Neo2Lammer
|
CHANGE YOUR HD NUMBER
(To get neo 2 remember Booters Free)