|
Main Index Buy LED lights Introduction Walkthroughs Forums 
ContributorsLinks Guestbook Home Tech Index Version Guide Progress Reviews Submissions LED info News Archive 
|
|
Here is a great tip from Chris regarding the drilling difficulty that some people may be having with the mod: "I've heard several people say that they had some difficulties drilling the pilot hole during the modification process. The complaint seems to be the "dancing drill bit" where it takes some effort to get the bit to bite into the surface. One tactic used when drilling glass might come in handy here. Take a small piece of masking tape and place it over the area where you want to drill. The drill bit will easily bite into the masking tape as you drill through. Simple as that! Hope this helps. Chris Erickson (IGN cerickso)" |
