jukifeatures4

Juki Features

Juki LZ-2282N 7/CP160 Needle Feed Industrial Sewing Machine
The LZ-2282N/-2282N-7 effectively supports the operator in the lace-attachment process for foundations dramatically increasing productivity. Upgraded operability. Since the knife stops at the upper position of its stroke at all times, the material can be smoothly placed on the machine. The knife height can easily be changed by operating the lever mounted on the front face of the machine in accordance with the type of material to be used. If the knife height is set at 0 (zero), the working surface of the machine will become flat. In this case, the knife-driving mechanism will be automatically turned off, permitting machine use for typical standard zigzag stitching operation. Productivity is dramatically increased. The machine incorporates a built-in lower knife that trims only the lower material. This allows the machine to simultaneously attach lace to the body of the foundation and trim only the body during processes to attach lace to the bottoms or tops of slips or to the joint seam lines of shorts.
The machine demonstrates consistent trimming performance. The knife is driven by a motor that runs independently from the sewing machine motor. With this feature, the knife can continue to run at a high speeds during trimming even when the speed of the machine is reduced during startup or when sewing curved sections. Furthermore, the knife is placed just beside the needle to provide a constant trimming width even on the curved sections.

Juki MB-373U Chainstitch Buttonsewer with Thread Trimmer
High-performance machine which sews buttons at high speed with accuracy, Sew buttons without cross-over stitches! Sewing size can easily be changed by moving a lever, Switch between 4-hole and 2-hole with the flip of a lever, Change buttonhole sewing interval, The number of stitches can easily be changed in accordance with sewing specifications, 6, 12, 24, 8, 16, and 32, Accurately sew buttons with consistent stitching specifications,
Machine ensures consistent sewing performance even when it runs at 1500 stitches per minute, Unique speed-decreasing device reduces vibration when sewing machine stops, thereby enabling the sewing machine to beautifully finish buttons with accuracy, Thanks to thread trimmer, which cuts the thread without fail, the machine can sew buttons with accuracy even when using a thick thread, Comes with a compact-in-size thread trimming mechanism which interlocks with the button clamp lifting lever, Thread trimmer allows the machine to beautifully finish buttons with no remaining thread after thread trimming, Machine can handle large buttons even with thick thread, Automatically starts twice continuously by only depressing the pedal once, 4-hole button sewing mode can be easily changed over to 2-hole button sewing by changing over the switch and adjusting the number of stitches with the setting lever, Incorporates mechanisms which are designed to help the operator, such as a safety mechanism which keeps the sewing machine running in only one cycle even when the pedal is held depressed

Juki MF-7723 High-Speed Flat Bed Top and Bottom Coverstitch
DEBUT! The MF-7700 series state-of-the-art machine that has been designed through a thorough ongoing study of seam quality , Since the seam tension may be easily increased or decreased, the machine can be used for a broader range of applications Seams can be adjusted depending on the application or material by changing the thread path or adjusting the thread tension controller, to produce soft and low-tensed seams for inner wear or to produce high-grade well-tensed seams for outer wear. Optimization of the thread take-up mechanism and top covering thread path route The optimized thread take-up mechanism and top covering thread path route contribute to an increased stability of top covering stitches. In addition, the machine is capable of performing sewing with a low tension applied to the thread to offer improved responsiveness to the sewing thread. The machine comes with a variety of features to increase applicable types of sewing products The machine is provided as standard with a great diversity of features, such as a differential-feed adjustment mechanism with a micro-adjustment mechanism, a feed dog inclination adjustment mechanism, a micro-lifter and a needle bar stroke conversion mechanism. The machine can therefore be quickly adjusted to respond to various materials and processes, thus increasing the applicable types of sewing products. Differential-feed micro- adjustment mechanism The differential-feed amount can be easily adjusted to the best suited value for the material to be used. Since the front and rear feed dogs are synchronized, the differential- feed ratio is constant, requiring no additional adjustment, even when the stitch length is changed.

Juki MH-380 High-Speed Flat Bed 2-needle Double Chainstitch
Many different attachments have been developed for the machine. This means that the JUKI MH Series sewing machine can adapt to many kinds of processes and specifications including hemming welting and decorative stitching. Accurate stitching performance and durable finished seams are particularly necessary in the chainstitching process. JUKI ensures high-quality sewing with a higher degree of consistency with its unique looper mechanism and consistent condensation stitching mechanism. Furthermore, highly efficient operation is achieved by using a chain-off thread cutting device.

Juki MH-1410B Double Needle Feed Chainstitch Cylinder Bed
This cylinder-bed needle-feed double chainstitch machine attaches waistbands to jeans and casual pants at the splendid sewing speed of 5,000rpm. High-speed performance and improved reliability and durability. With its head mechanism to ensure optimum balance and high rigidity, the machine achieves high-speed performance of 5,000rpm with reduced operating noise and vibration. And now that an automatic lubricating system and strong needle-feed mechanism are newly adopted, the machine guarantees improved reliability and durability.

Juki MH-1410D Double Needle Feed Chainstitch Cylinder Arm
This new 4-needle unit provides excellent seam quality at high sewing speeds so that you can handle bulk amounts of stitching jobs. This unit is equipped with the V072 cloth puller, driven by a top roller, ensuring excellent feed efficiency and uniform stitch pitch when sewing multi-layered sections of the work piece
Sews at up to 5,000 s.p.m. for attaching waistbands to jeans. Easy adjustment of stitch length and stitch pitch make using this machine simple and easy, Fully automatic lubrication system so that you don't have to worry about forgetting to lube your machine, Adjustable differential feed and simple looper threading, Sewing speed: max. 4,000 s.p.m. when using puller, Stitch length: 2.1mm � 6.4mm, Needle gauge: 34.9mm (1-3/8") * Feed system: needle Feed, Stitch system: chain stitch, Auto foot lift: Max. 9mm (pneumatic), Stitch adjustment: by push button (needle feed/bottom feed synchronized)