Johnson Ruffler Sewing Machine HA-1 Gathers up to 6 to 1 Ratio, with Drapery Header Guide Plate & Dress Ruffling Plate
Up To 900 Stitches Per Minute,
All-Metal Construction,
Can Ruffle 6 Feet Into 1 Foot,
Ruffles 1 Layer Or 1 Layer To Flat Fabric,
Convert To Straight Stitch Without Ruffle,
Portable Ruffling Machine HA-1 Head,
Light Assembly Installation Included FREE,
Includes Wiring & Foot Control
The standard plate (sometimes called a curtain or drapery plate) fastens with screws to the base of the machine. The material that is to be ruffled goes over the top the plate and the material that stays flat (called the flat panel) to which the ruffle is attached goes under the plate. Because of the location of the screws, the ruffles can only be sewed close to the edge of the flat panel . On the other hand, the optional dress plate does not attach to the base but is mounted on long rods that hinge from holes in the upright part of the machine. This gives much more room for the flat material and allows ruffles to be attached farther from the edge of the flat panel as would be necessary in sewing ruffles in tiers to a dress. If you buy the optional dress plate you also get the standard plate. The user can install either plate on the machine depending on which is required. ( the standard plate does have the advantage of being a bit more rigid than the dress plate, so if you are not doing ruffles far from the edge you would probably want to use the standard plate. ) The machine can also sew ruffles without attaching to a flat panel and sew straight stitch without ruffling. |
