From: Tom Helms <[email protected]>
Newsgroups: microsoft.public.cert.exam.mcse
Sent: Monday, March 25, 2002 3:42 AM
Subject: Re: How to prevent user install any apps?
If they are members of only the users group, they should not be able to
install programs. You need to be a member of power users or administrators
to install programs.
"JohnW" <[email protected]> wrote in message
news:KEon8.117040$q2.10511@sccrnsc01...
Oops.
Win2k Pro.
"Tom Helms" <[email protected]> wrote in message
news:#tYuS210BHA.2468@tkmsftngp02...
on what OS??
"JohnW" <[email protected]> wrote in message
news:3oon8.116927$q2.10844@sccrnsc01...
Hello,
Need your experties on following two tasks:
1. hide C drive
2. prevent user install any applications
I tried local computer policy and it won't work well. Policy won;t stop user
type in path to access any drive and can't find how to disable install
downloaded programs.
Thanks in advance.

From: JLKey <[email protected]>
Newsgroups: microsoft.public.cert.exam.mcse
Sent: Tuesday, March 19, 2002 11:18 AM
Subject: Re: Join existing domain
Go to user profiles and copy your old profile to your new one.
"Frank Brown" <[email protected]> wrote in message
news:#muAisuzBHA.1396@tkmsftngp05...
I'm a newbie as an SA, just got marching orders from my boss to take over
our LAN and start on the MCSE trail.  Though I's still studying for 210, I
needed to add a domain server to our intranet.  Set the server up and joined
my Win2K machine to the new domain.  It set up a new profile, which removed
my mail and preferences.
Would someone be so kind as to wind me up and point me toward the references
I need so i can restore my profile and not do this to everyone that I join
to the domain?
TNX
Brown
Ignorance is bliss,  I'm just a happy camper!!!

From: JayDubb <[email protected]>
Newsgroups: microsoft.public.cert.exam.mcse
Sent: Monday, March 18, 2002 8:23 AM
Subject: Re: Electives
If really depends on what networking discipline you want to spend your career
with.  You mentioned climbing the Cisco ladder, which is more wire-side; i.e.,
routing, switching, protocols, firewalling, etc..
The 70-221 network design elective leans more toward designing network
*services*-- i.e., how many DNS, WINS, and DHCP servers are needed to meet
requirements, software routing, remote access, etc.
If you want to be more of a hard-core engineer supporting (for example) the
routing mesh for an ISP/NSP or large corporation, or figuring out why there is
20% packet loss on a customer's DS-3 when circuit utilization is below 30%,
then the 221 will be somewhat irrelevant.  If on the other hand you want to be
more involved with the systems end of networking, supporting services that run
on top of the wire, then your assumptions are correct.
Eric wrote:
My long term career goals are to get into network infrastructure and I plan
on climbing my way up the Cisco ladder.
<...>
But on the other elective, what would probably be most beneficial to me for
knowledge in the network arena?  I'm thinking network  design, but without
looking at the material I don't know.  Any input would be apreciated.

From: Jeffrey W. Roach <[email protected]>
Newsgroups: microsoft.public.cert.exam.mcse
Sent: Sunday, March 17, 2002 2:01 PM
Subject: Re: 70-217 Info
I had the same experience last week when I took it...
Jeff
"Robert Laurent" <[email protected]> wrote in message
news:[email protected]...
I just took and passed 70-217.
63 Questions, and I used the whole 3 hours. In fact, I ran out of time.
Interesting tidbit about my exam. I ran across a question that told me to
choose all that apply, but was only able to select one answer.
Then again, I had a duplicate question on it too, so I guess that made up
for it.
-Robert Laurent, MCSE

From: J?n H. Henriksen <[email protected]>
Newsgroups: microsoft.public.cert.exam.mcse
Sent: Saturday, March 16, 2002 3:52 AM
Subject: Re: How many questions are on the Professional test?
"Malic" <[email protected]> skrev i melding
news:[email protected]...
I was thinking there were 50 like the transcenders.  But I talked to an
old MCSE and she told me it was 75.
>2000 Pro had 50, and XP Pro had 63 when I took them in January.
-JHH-

From: steven <[email protected]>
Newsgroups: microsoft.public.cert.exam.mcse
Sent: Sunday, March 10, 2002 4:45 PM
Subject: Re: Routing Problem
Laura,
I must thank you for your assistance. After double checking my
setting I found the DHCP server to be passing out the wrong default gateway
for the subnet with the DSL router on it. This isn't the way I wanted to
spend my Saturday, but what the heck. The funny thing is I checked, and
double checked the default gateway. I win the moron move of the week.
Thank you,
Steven
"Laura A. Robinson" <[email protected]> wrote in
message news:[email protected]...
circa Sat, 9 Mar 2002 20:31:33 -0800, in
microsoft.public.cert.exam.mcse, steven ([email protected])
said,
My mistake on the IP address as it should read 192.168.0.1. I remove the
subnet mask from interface "A" and it didn't help. I added a static route
from one of the work stations to the affect of "Route add 192.168.2.0 mask
255.255.255.0 192.168.0.1" and I am able to communicate with any host on the
other subnet. When I use the same methodology on the other subnet It fails
to achieve the desire result of being able to communicate. I am missing
something simple.
You should not need static routes.
Your multihomed server should be configured as follows, assuming that
NIC 1 is the NIC on the same subnet as the broadband router (if it
isn't, adjust accordingly):
Nic 1 IP address 192.168.2.1/24, gateway <internal address of
broadband router>
Nic 2 IP address 192.168.0.1/24, no gateway
Clients on the subnet for NIC 1 should be configured as follows:
IP address 192.168.2.x/24, gateway 192.168.2.1
Clients on the subnet for NIC 2 should be configured as follows:
IP address 192.168.0.x/24, gateway 192.168.0.1
Alternately, for clients on the same subnet as the NIC that is on the
same subnet as the broadband router, you could give them its internal
address as their default gateway.
By the way, when you refer to the broadband router, I assume that you
mean a device that is separate from your multihomed server.
Laura
--
One man's mundane and boring existence is another man's Technicolor.
-Tick, Strange Days

From: AM췖 <[email protected]>
Newsgroups: microsoft.public.cert.exam.mcse
Sent: Friday, March 08, 2002 10:47 AM
Subject: MCP with 800 !
Hi
Actually it's my First Post ever in this group Although i subscribed long
time ago ..
Anyways ... Today i've passed My MCP exam 070-210 with score  800  ;)
inspite of being so Defficult .. the exam really measures Your True Skills
and intelligence Rate .. ok .. i'm so happy to pass it and get my MCP Cert
.. it's only a 1st Step Forward :)
bye
AM췖
MCP

From: Hugo <[email protected]>
Newsgroups: microsoft.public.cert.exam.mcse
Sent: Thursday, March 07, 2002 5:05 AM
Subject: Re: Mandatory Profiles
Hi !
Create all profile you need..... place profile on a shared folder and rename
it ".MAN"... Configure all user to point to the require mandatory profile !
Hugo
"jason" <[email protected]> a ?rit dans le message news:
OYCTymTxBHA.1400@tkmsftngp07...
Hi NG,
I have been asked to look into the possiblilities of changing all user
profiles from local to mandatory.  My experience is in Windows2000 so I am
not too familiar with NT.  I was hoping someone here could give me some
ideas.
The current network has about 1000 workstations with about 1500 users all
with local profiles.  We do not want to implement Roaming profiles as we
don't have the server space to store them.
We are trying to eliminate the need to spend large amounts of time at
workstations resolving issues that could be solved by re-imaging the
workstation.  In order to best accomplish this we are thinking of
implementing home folders and mandatory profiles.  The home folders are not
an issue.
My questions are:  Does NT4 support mandatory profiles and if so, can an
organization have 5 or 6 different mandatory profiles for different
departments?
Any help you can give me would be much appreciated.
Thanks,
Jason...

From: Sherman McCoy <[email protected]>
Newsgroups: alt.binaries.warez.win2000,alt.certification.mcse,microsoft.
public.cert.exam.mcse
Sent: Tuesday, March 05, 2002 10:31 AM
Subject: Re: Where can i find some FREE CBTs?
WTF are you doing?  When did you choose to be a lowlife scum?  There's
a post by this cocksucking asshole, Christ Smith over at
alt.binaries.ctbs, so you must be one of his minions, right?
On Mon, 04 Mar 2002 18:29:04 GMT, "C��nsultant��"
<[email protected]> wrote:
email [email protected], he is an inside guy and can get you free
transcenders to practice with too! just don't tell too many people
"Goose" <[email protected]> wrote in message
news:[email protected]...
Hello All,
Where can I find some Free Learnkey CBTs 70-210 and 70-215.
Thanks,
Goose

From: Rafael Adam <[email protected]>
Newsgroups: microsoft.public.cert.exam.mcse
Sent: Tuesday, March 05, 2002 6:20 AM
Subject: Re: BrainDumps
Nice answer
Bafi
"C��nsultant��" wrote:
they use their smart brain
lol
"Rafael Adam" <[email protected]> wrote in message
news:[email protected]...
I wonder how people do braindumps from MCSE exams? Just wonder. Who can
remember so many questions?
Bafi

From: JayDubb <[email protected]>
Newsgroups: microsoft.public.cert.exam.mcse
Sent: Sunday, March 03, 2002 8:17 AM
Subject: Re: Has anyone attended a Microsoft Tech Ed event?
What is the cost for a typical MEC event?  I'm sure there will probably be
some invitations from MS in my future now that I achieved MCSE, but under my
current situation the cost will come out of my own wallet.
"Laura A. Robinson" wrote:
Tech Ed is for codeweenies. Go to MEC if you're a systems person. And
yes, the content is worthwhile.