Conference Publications (1996-2000): [10] S. M. Hashemi and M. J. Richard 1999, "On the Natural Frequency Calculation of Rotating Cantilever Uniform Beams With Coriolis Effects - Dynamic Finite Element (DFE). The "17th Biennial ASME Vibrations Conference", Las Vegas, Nevada, 12-15 September 1999. ASME Paper No. DETC99/VIB-8269. [9] S. M. Hashemi and M. J. Richard 1999, " On the Natural Frequencies of Rotating Blades with Discontinuous Geometry - A Dynamic Finite Element (DFE)". Proceeding of ``17th CANadian Congress of Applied Mechanics (CANCAM 1999)'', McMaster University May 30 - June 3, 1999, Hamilton, Ontario. [8] S. M. Hashemi and M. J. Richard 1999, "A Dynamic Finite Element (DFE) for Coupled Bending-Torsional Vibrations of Axially Loaded Beams". Proceeding of The 40th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, pp. 1707-1716, April 12-15, 1999, St. Louis, Missouri. AIAA Paper No. AIAA-99-1402. [7] S. M. Hashemi, M. J. Richard and G. Dhatt 1998, "Free Vibration Analysis of Rotating Flexible Structures Including The Coriolis Effects - A New Dynamic Finite Element (DFE) Method", The 2nd Iranian Conference on Aerospace Eng, University of Science and Defense Technology, Shahinshahr, Esfahan, Iran, October 1998. [6] S. M. Hashemi, M. J. Richard and G. Dhatt 1997, ``On The Coupled Bending-Torsional Natural Frequencies and Modes of Beams; A Frequency Dependent Dynamic Finite Element (DFE)''.The proceeding of the Canadian Society for Mechanical Engineering (CSME) Forum 1998, pp, 468-575. [5] S. M. Hashemi, M. J. Richard and G. Dhatt 1997, "A Dynamic Finite Element (DFE) Approach for Coupled Bending-Torsional Vibrations of Beams". The proceeding of The 39th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. April 20-23, 1998 Sheraton Long Beach, Long Beach, CA. AIAA Paper No. AIAA-98-2020. [4] S. M. Hashemi, M. J. Richard and G. Dhatt 1997, ``A Bernoulli-Euler Stiffness Matrix Approach for Vibrational Analysis of Spinning Linearly Tapered Beams". 42nd ASME Gas Turbine and Aeroengine Congress'', Orlando, Florida, June 2-5. ASME Paper (pamphlet) No. 97-GT-500. [3] S. M. Hashemi, M. J. Richard and G. Dhatt 1997, ``A Dynamic Finite Element (DFE) Formulation for Free Vibration Analysis of Centrifugally Stiffened Uniform Beams". Proceeding of ``16th CANadian Congress of Applied Mechanics (CANCAM 1997)'', pp. 443-444, June 1-6, Qu�bec, Qu�bec. [2] S. M. Hashemi, M. J. Richard and G. Dhatt 1997, "A Bernoulli-Euler Dynamic Finite Element(DFE) Approach for Vibration Analysis of rotating Uniform Beams", Proceeding of "The First Iranian Conference On Aerospace Engineering", Amir-Kabir (Tehran Polytechnic) University, January 1-2, Tehran, I-R-IRAN. (in Persian). [1] S. M. Hashemi, M. J. Richard and G. Dhatt 1996, ``A Bernoulli-Euler Stiffness Matrix Approach for Vibrational Analysis of Linearly Tapered Beams'', Proceeding of Acoustic Week in Canada 1996, p. 87, October 7-11, Calgary, Alberta. ------------------------------------------------------------------ Last Updated January 22, 2003 |