The Basic Model

This is the easiest to build and the best way to get started

What you need:

3" PVC Pipe-about 8-12 inches long

3" Cap

3"-1.5" Adapter

1.5" PVC Pipe-24"-40" or however long you want it to be

Igniter

Directions:

Glue all Pieces together-You can't screw up they only fit together one way

Drill a hole a few inches down from the adapter

Remove the neck of the igniter-you will find 2 wires

Run both wires in the hole and fill it in with epoxy

Let everything dry overnight and the next day you will have yourself some fun