Vessels Modification for Offshore Projects
Dayang Shipayard,
China- preparations for ROV Installation on board of PSV „Bourbon Diamond“
Halcyon Shipyard,
Singapore- Installation of complete ROV Camp on board PSV“ Bourbon Diamond“ for
client TOTAL. Also prior Deck
Reinforcement calculation.
Dormac Shipyard,
South Africa- Installation of Offshore Crane on board MPSV „ Bourbon Arethuse“
CNIC Shipayrd,
Cameroon- ROV Camp Installation for client MARATHON on board MPSV „Bourbon
Arethuse“
CNIC Shipyard,
Cameroon- Flushing systems for Sea Chests of Box Coolers- project, design and
installation on board „Bourbon Liberty 206“ (Author- Vadim Popkov) for client
EUROIL. This is to allow vessel to work on very shallow waters.
Modifications of
Seatrucks vessels in China.
Installation of
ROV Camp on board DSV „Citadele“ for client BP in Baku, Azerbaijan
Design,
calculation of requested power for ROV Camp on board DSV „Citadele“
Installation of
Diesel Generators on deck of DSV „Citadele“
Conversion and
modifications of DP-2 Pipealy/ Construction vessel „Lewek Champion“ : hull modification,
installation of 2400 tons crane, Switchboards modifications, preparation of
FMEA.
FMEA tests
Year:2013 MV “ Sea
Installer”. Type: DP-2 Self-propelled Jack-up, Wind Turbine Installation
vessel.
Client- A2SEA A/S, Denmark. Class-DNV GL.Work scope: full FMEA study and
preparation. FMEA Proving trials.
Year: 2013 Semisub
“Maersk Discoverer”. Type: DP-3 Self-propelled Semi submersible Drilling
Rig. Client- Maersk Drilling A/S,
Denmark. Class- ABS.Work scope: full FMEA revision and Proving trials.
Year: 2013 MV “Geco
Bluefin”. Type: DP-2 Seismic Survey vessel. Client: Volstad Seismic A/S,
Norway. Class- DNV GL.Work scope: FMEA revision, FMEA Addemdums, proving
trials.
Year: 2013-14 MV “Sea
Challenger”. Type: DP-2 Self-propelled Jack-up. Wind Turbine installation
vessel. Client: A2SEA A/S, Denmark.
Class: DNV GL.Work scope: full FMEA study and preparation. FMEA Proving trials.
Year-2014.MV “Ceona
Amazon”. Type: DP-2 Construction/Pipelay vessel. Client: Ceona Offshore,
UK. Class: DNV GL.Work scope: full FMEA
study and preparation. FMEA Proving trials.
Year: 2014 MV “Scandi
Arctic”. Type: DP-2 Construction/DSV. Client: DOF Subsea, UK. Class: DNV
GL.Work scope: FMEA revision, proving trials.
Year: 2016 MV “Lewek Champion”. Type; DP-2 Construction/ Pipelay vessel. Client: Emas Chiyoda Subsea, Singapore. Class: LR.Work scope: full FMEA study and preparation due to full vessel vessel conversion. FMEA Proving trials
Offshore Technical Management:
Attained good
experience of working with Class requirements regarding hull, machinery and
installation works, reading, understanding and correction (if necessary)
drawings.
Design Experience:
Isoton A/S, who
usually was a General Contractor for new building. Responsible for hull, deck
outfitting, accommadation, machinery and installition works under DNV. Good
experience with correction of Offshore vessels design during building.
Offshore Construction
2016 - Customer PMS
(Petroleum Marine Service) client Rashpetko ,Offshore Construction
Consultancy/Supervision/Offshore Subsea Operation/Rigging and Lifting
Supervision/Training for new team
2014- Customer
Subsea7 (Acergy) Offshore Subsea Crane Modification PHC system to AHC
system/Quality Adit and QC/Offshore testing and Inspections.
2014- Customer Bourbon
Norway , Client BP ,Offshore Heavylift Construction Supervision
(x-mass trees and jumpers
installation, depth 2000m)
2014 –Customer SIEM
and Daya Construction.Offshore Heavylift Construction Supervision (transfer
manifolds installation)
2013- Customer Bourbon
Serf.Offshore Subsea Crane QC/QI, Offshore testing for New Bourbon Evolution
series IMR vessels (SMST and MacGregor Subsea Heavylift crane)/Rigging and
Lifting Supervision/Rigging loft Management
2011 Customer Bourbon
Serf.Offshore Subsea Crane QC/QI, Offshore testing for New Bourbon
Evolution series IMR vessels (SMST and MacGregor Subsea Heavylift cranes)/Rigging loft Management