and
Intercooler
First I cut the tube length wise so I could get inside and smooth out the ports.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Intake Manifold and Intercooler |
|||||||||||||||||||||
| I took a manifold from a stratus, I believe. I saw off most of the runners for welding a 5" OD tube too. I purchased this tube from Ebay. It is 5.0 OD x 18" x .120 wall. First I cut the tube length wise so I could get inside and smooth out the ports. |
|||||||||||||||||||||
|
|||||||||||||||||||||
|
|||||||||||||||||||||
| Then, I welded the other piece back onto the intake | |||||||||||||||||||||
|
|||||||||||||||||||||
|
|||||||||||||||||||||
| The notch in the inake is for movement of the engine near the radiator inlet. I didn't want to take any chances. | |||||||||||||||||||||
|
|||||||||||||||||||||
| I welded 3 stock T2 intercoolers together | |||||||||||||||||||||
|
|
|||||||||||||||||||||