T1F Frequency selection and sharing; transmitter
power; digital
communications
T1F01
@T1B06 [97.303]
If the
FCC rules say that the amateur service is a secondary user of a
frequency
band, and another service is a primary user, what does this
mean?
A. Nothing special; all users of a frequency
band have equal rights
to
operate
B. Amateurs are only allowed to use the
frequency band during
emergencies
C. Amateurs are allowed to use the frequency
band only if they do not
cause
harmful interference to primary users
D. Amateurs must increase transmitter power to
overcome any
interference
caused by primary users
T1F02
@T1B08 [97.101b]
What
rule applies if two amateur stations want to use the same
frequency?
A. The station operator with a lesser class of
license must yield the
frequency
to a higher-class licensee
B. The station operator with a lower power
output must yield the
frequency
to the station with a higher power output
C. Both station operators have an equal right
to operate on the
frequency
D. Station operators in ITU Regions 1 and 3
must yield the frequency
to
stations in ITU Region 2
T1F03
@T1B09 [97.205c]
*Modified
Q from Educational Review
If a
repeater is causing harmful interference to another repeater and
a
frequency coordinator has recommended the operation of one repeater
only,
who is responsible for resolving the interference?
A. The licensee of the unrecommended repeater
B. Both repeater licensees
C. The licensee of the recommended repeater
D. The frequency coordinator
T1F04
@T1B10 [97.205c]
*Modified
Q from Educational Review
If a
repeater is causing harmful interference to another amateur
repeater
and a frequency coordinator has recommended the operation of
both
repeaters, who is responsible for resolving the interference?
A. The licensee of the repeater that has been
recommended for the
longest
period of time
B. The licensee of the repeater that has been
recommended the most
recently
C. The frequency coordinator
D. Both repeater licensees
T1F05
@T1B12 [97.3b6]
What is
the term for the average power supplied to an antenna
transmission
line during one RF cycle at the crest of the modulation
envelope?
A. Peak transmitter power
B. Peak output power
C. Average radio-frequency power
D. Peak envelope power
T1F06
@T1B13 [97.313b]
What is
the maximum transmitting power permitted an amateur station on
146.52
MHz?
A. 200 watts PEP output
B. 500 watts ERP
C. 1000 watts DC input
D. 1500 watts PEP output
T1F07
@N1F09 [97.313c]
*Modified
Q for Rules changes
On
which band(s) may a Technician licensee who has passed a Morse code
exam
use up to 200 watts PEP output power?
A. 80, 40, 15, and 10 meters
B. 80, 40, 20, and 10 meters
C. 1.25 meters
D. 23 centimeters
T1F08
@N1F01 [97.313a]
What
amount of transmitter power must amateur stations use at all
times?
A. 25 watts PEP output
B. 250 watts PEP output
C. 1500 watts PEP output
D. The minimum legal power necessary to
communicate
T1F09
@N1F13 [97.3c2]
What
name does the FCC use for telemetry, telecommand or computer
communications
emissions?
A. CW
B. Image
C. Data
D. RTTY
T1F10
@N1F14 [97.3c7]
What
name does the FCC use for narrow-band direct-printing telegraphy
emissions?
A. CW
B. Image
C. MCW
D. RTTY
T1F11
@T1C04 [97.307f5]
What is
the maximum symbol rate permitted for packet transmissions on
the
2-meter band?
A. 300 bauds
B. 1200 bauds
C. 19.6 kilobauds
D. 56 kilobauds
T1F12
@T1C06 [97.307f5]
What is
the maximum symbol rate permitted for RTTY or data
transmissions
on the 6- and 2-meter bands?
A. 56 kilobauds
B. 19.6 kilobauds
C. 1200 bauds
D. 300 bauds