Here's a front view of my engine after all the polishing was completed.
Another view, you can see my JET-HOTT coated headers also.
Water pump before polish and buff. Also buffed billet pulley.
Water pump after polish and buff.
Griffin aluminum radiator after buffing out.
Valve cover before re-buff.
Valve cover after re-buff.
Polishing and buffing services are now available from Chawness.com
The word polishing is often confused with buffing when speaking of aluminum parts. Polishing is the act of sanding off the rough cast in preperation for the buffing process. Buffing is the act of bringing the part to a mirror like finish. If you have a part that hasn�t already been brought to a mirror like finish once apon a time, it will need to be polished (sanded) and buffed. If your part had a mirror like finish and is just dulled out, it will most likely only need to be re-buffed. Some cast marks or pits / scratches are to deep to be removed from the parts. This is common on parts such as cast aluminum water pumps and blowers. Send an email for a quote on your parts.