Construction is straightforward. Cut and shape the pieces. Cut the top a little overwide -- it's easier to trim it later than to reduce the width across the aprons. I found it best to use a fly-cutter in my drill press to make the circle for the bottom of the legs, then separate the legs after the circle is cut and legs rounded over. During my first run of these stools, I nailed the aprons to the legs. I now do it differently. It requires a little more work, but I think it's worth the effort to cut a quarter-inch dado in the aprons to receive the legs. Adjust the notch in the legs accordingly. Assemble the aprons and legs with glue, then screw the aprons into the top from below. Finally, trim the top to width and round-over all its edges with a 3/4" roundover bit. Apply a durable finish.
Although this is a simple piece, it makes an exceptional gift that will be appreciated for years to come. Select a suitably attractive wood.
Return to The homepage |