This is my 1977 Oldsmobile Omega
(This may take a minute to load, there are many images)
As you can see from the pictures above my car looks like it did when it came off of the production line, except for the rims and tires. The body is the only thing left stock on the car.
Engine:
The original 260 was removed and replaced with:
Exhaust:
- Blackjack headers
- 3" Exhaust with 2 chamber Flowmasters
Trasmission:
The original TH200 was replaced with a 1973 TH350
- B&M Manual valve body
- ATI 8" 5000stall converter
Rearend:
The original 7.5" 10 bolt was replaced with an 8.5" 10 bolt out of a 78 camaro.
- 4.56 Richmond gears (soon to be 3.90's)
Interior:
The original bench seat and column shifter were replaced with:
- Bucket seats out of a 1982 Pontiac J2000
- Console and shifter out of a 1977 Oldsmobile Cutlass Supreme
- New rug from ACC
- The ignition system, coil & misc. electronics under the dash in heater core area.
- Digital gauges (Water temp., Oil pressure, & Volt meter)
- Autometer tach
Suspension:
Not much has changed here except:
- Koni 90/10 front shocks
- Gabriel OEM replacements for the rear
- Frame ties
- 1.5" rear sway bar
Can you believe that they actually made a model for a 1977 Omega, here it is.
If anyone knows of where I can get more of these models E-mail me at the link below.
Bryan's Oldsmobile Omega main page
Porting my heads page
Other people's Omegas
Oldsmobile links page
Send me a mail note
Page Updated 8/1/2001
