|
Mine&Mineral Ores:
We are able to provide the following items with such specifications. If you
can't find what you're looking for here please e-mail us with your request and
we will reply to you ASAP.
Sand:
Gravel:
Granules: From 2.00 mm to 4.0 mm
Pebbles: From 4.00mm to 64 mm
Silica Sand:
This sand is quite pure and is used in manufacturing of
glass sheets, Crystal and different glass containers. White sand is used in
foundries and filters and glass products.
Quartz:
The Egyptian quarts is free of Aluminum
oxide and calcium oxide. We offer it in both solid Rock or powder.
Ilmenite:
The quality of the Egyptian ilemenite is one of the best in
the world.
Feldespar:
The potash feldspar and palgic one also occur in central
eastern dessert mines.
Chemical Analysis:
K2o 5-9
Na2o 2.6-3
Fe2O3 0.10-0.11
Talcum:
This talcum ore is a product of metamorphic process of basic
or intermediate rocks in the sheer zone. The sheerings and crushing are formed
then channels through the rock line carrying the real solutions.
Barite Ore:
In Aswan area in southern eastern desert, the ore appears as
small Hydrothermal veins.
Kaolin (white clay):
It's considered one of the best kaolin in the middle east.
The percentage of Alumina in kaolin ranges from 23 to 37 %, and the coloring
ions ars less than 3%.
Bentonite:
Around 90% of the grinded Bentonite is used in foundries and
agriculture purposes.
Particle size:
Raw Bentonite: from 0 to 15 cm.
Powder, up to 200 mesh.
Gypsum Ore:
Gypsum Ore from south Sinai which is used to produce
calcinied Gypsum for construction purposes also it is used in cement industry,
Construction materials and in production of sulphoric acid.
Size: According to customer requirements.
Calcinied Gypsum:
Industrial processing of ore deposits to meet the increasing
demand for building materials.
Specifications:
Free water Nil
combined water 5-7
compressive strength 1800 PSI
Initial setting time 8-15 minutes
Fineness 90% min, pass sieve 100 mesh
Whiteness 96% min
Aswan Clay:
The mine of clay is located in Aswan area.
Ferro Manganese:
High Carbon Ferro Manganese alloys
Mn 75-78
C
6-8
Si
1 Max.
P
0.20 Max.
S
0.03 Max
According to customer's requirement.
Magnetsite Ore (magnesium Carbonate):
This ore is extracted from south eastern desert. It is found
as small masses spread very wide and the upper parts of these masses are more
better. MgCo3 percentage in the ore is likely to be 80%.
Ferro Silicon:
According to customer requirements. Ferro Silicon is
composed of up to 75 % Silicon.
Granite, and different kinds of raw
Ores.
Ammonium Nitrate.
| 
