1.Y.Temelli, Ö.Yazıcıoğlu, M. Çakmak, C. Bindal A. H. Üçışık, M. Göksan, R. Tözün, "Paslanmaz Çeliklerin Cinsleri ve Isıl İşlemi", Acta Orthopaedica et Traumalogica Turcica, 18, 3(1983)103-107.

2. A. H. Üçışık, Ü. Domaniç, A. Hamzaoğlu, S. Zeytin, C. Bindal, "Bir Harrington Çubuğunda Yorulma Kırılmasının Analizi", Acta Orthopaedica et Traumalogica Turcica, 19, 3(1985)371-375.

3. A. Erdemir, C. Bindal, "Formation and Self-Lubricating Mechanism of Boric Acid on Borided Steel Surfaces", Surface and Coatings Technology, 76-77 (1995) 443-439.

4. C. Zuiker, A. R. Krauss, D. M. Gruen, X. Pan, J. C. Li, R. Csencsits, A. Erdemir, C. Bindal, G. R. Fenske, "Physical and Tribological Properties of Diamond Films Grown in argon-Carbon Plasmas", Thin Solid Films, 270 (1995) 154-159.

5. A. Erdemir, C. Bindal, J. Pagan, P. Wilbur, "Characterization of Transfer layers on Surfaces Sliding Against Diamond-like Hydrocarbon Films in Dry Nitrogen", Surface and Coatings Technology, 76-77 (1995) 559-563.

6. A. Erdemir, C. Bindal, C. Zuiker, P. Wilbur, "Characterization of Transfer layers Forming on Surfaces Sliding Against Diamond-like carbon", Surface and Coatings Technology, 86-87 (1996) 692-697.

7. A. Erdemir, C. Bindal, C. Zuiker, E. Savrun, " Tribology of Naturally Occuring Boric Acid Films on Boron Carbide", Surface and Coatings Technology, 86-87 (1996) 507-510.

8. A. Erdemir, C. Bindal, G. R. Fenske, C. Zuiker, A. R. Krauss, D. M. Gruen, " Friction and Wear Properties of Smooth Diamond Films Grown in Fullerene + Argon Plasmas", Diamond and Related Materials, 5(1996)923-931.

9. A. Erdemir, C. Bindal, G. R. Fenske, C. Zuiker, R. Csencsits, A. R. Krauss and D. M. Gruen, "Tribological Characterization of Smooth Diamond Films Grown in Ar-C60 and Ar-CH4 Plasmas", Diamond Films and Technology, 6,1 (1996)31-47.

10. A. Erdemir, C. Bindal, G. R. Fenske and P. Wilbur, "Tribological Properties of Hard Carbon Films on Zirconia ceramics", Tribology Transactions, 39, 3 (1996) 735-744.

11. A. Erdemir, C. Bindal and G. R. Fenske, "Formation of Ultralow Friction Surface on Boron carbide", Appl. Phys. Lett. 68 (12), March 18(1996) 1637-1639.

12. C. Bindal and A. Erdemir, "Ultralow Friction Behaviour of Borided Steel Surfaces After Flash annealing", Appl. Phys. Lett. 68 (7), Feb.12(1996) 923-925.

13. A. H. Üçışık, C. Bindal, "Fracture Toughness of Boride Formed on Low-alloy Steels", Surface and Coatings Technology, 94-95 (1997) 561-565.

14.C. Bindal, A. H. Üçışık, Characterization of Boronizing of Manganese-Based Low Alloy Steels", Journal of Australian Ceramic Society", 34, 2(1998)287-292.

15.C. Bindal, A. H. Üçışık, "Characterization of borides formed on impurity-controlled chromium-based low alloy steels", Surf. & Coat. Technol. 122(1999) 208-213.

16.S. Sen, M. Usta, C. Bindal and A. H. Üçışık, "Mechanical Behaviour of Non-Oxide Type Ceramics Formed on The AISI 1040 Carbon Steel" The Korean J. Of Ceramics 6(1)27-31 (2000).

17. I. Ozbek, H. Akbulut, S. Zeytin, C. Bindal, A. H.Ucisik, "The characterization of borided 99.5% purity nickel", Surf. & Coat. Technol.126(2000)166-170.

18.S.Sen, I. Özbek, U. Şen,, C. Bindal, "Mechanical Behaviour of Borides Formed on Borided Cold Work Tool Steel", Surf. & Coat. Technol. 135(2001) 173-177.

19. I. Özbek, B. A. Konduk, C. Bindal and A. H. Ucisik, "Characterization of Borided AISI 316L Stainless Steel Implant", Advances in Applied Plasma Science, Vol.3, (2001)245-250.

20.I. Özbek, B.A. Konduk, C. Bindal, A. H. Ucisik, Characterization of borided AISI 316L stainless steel implant, Vacuum 65 (2002) 521-523.

21.S. Zeytin, B. A. Konduk, M. Ipek, C. Bindal, A. H. Ucisik, An evaluation of human cartialge on femoral head, Materials Science and Engineering C 20 (2002) 219-222.

22.I. Özbek, C. Bindal, Mechanical properties of boronized AISI W4 steel, Surface and Coating Technology 154 (2002)14-20.

23.K. Genel, I. Özbek, A. Kurt, C. Bindal, Boriding response of AISI steel and use of artificial neural network for prediction of borided layer properties, Surface and Coating Technology 160 (2002)38-43.

24. I. Ozbek, S. Sen, M. Ipek, C. Bindal, S. Zeytin, A. H. Ucisik, " A Mechanical Aspects of Borides Formed on The AISI 440C Stainless Steel", Advanced in Applied Plasma Science, Vol.4 (2003) 337-342.

25. M. Vural, M. Z. Erim, C. Bindal, S. Zeytin, and A. H. Ucisik,"Traumatological and Ballistic Aspects of Alumina Ceramics", Key Engineering Materials Vols. 240-242 (2003) 623-626.

26. K. Genel, I. Özbek, C. Bindal,"Kinetics of Boriding of AISI W1 Steel", Materials Science & Engineering A 347 (2003) 311-314.

B. Uluslararası bilimsel toplantılarda sunulan ve bildiri kitabında (Proceedings) basılan bildiriler :

1.A. Selçuk, A. H. Üçışık, C. Bindal, S. Zeytin, "Camlarda İndentasyon Testiyle Kırılma analizleri", Seramik Teknik Kongresi Bildiriler Kitabı, TMMOB, Ankara, Nisan (1985)568-574.

2. A. H. Üçışık, M. A. Göksan, I. Üçok, C. Bindal, "Comparative Mechanical Properties of Human Bones", Proc. of 7th Intl. On Strength of Metals and Alloys, 3 (1986) 2143-2147.

3. S. Zeytin, C. Bindal, H. Çep,A. H. Üçışık, "Bir Amonyak Sentez Kompresöründe Hasar Analizi", 3. Ulusal Kırılma Konferansı, İstanbul, Eylül (1991)251-258.

4. C. Bindal, A. H. Üçışık, "The Effect of Boronizing on The Surface Properties of Alloy steels", Sci. of Eng. Ceram. Published by Ceramic Soc. Of Japan, October 21-23,(1991) 223-228.

5. C. Bindal, A. Erdemir, A. H. Üçışık, "The Effect of Boronizing (Boride Type Ceramic Coating) on Surface of Fe-0.0%C-0.02%P Alloy", Proc. Intl. Ceram. Congress, İstanbul, October (1992) 516-521.

6. C. Bindal, Metin Usta, A. H. Üçışık, "Boride Type Ceramic Coatings on Iron Alloy as candidate Implant Materials in Orthopaedics and Dentistry", Proc. of The Intl. Biomedical Engineering Days, Istanbul, (1992) 237-238.

7.U. Şen, F. Fındık, E. Avci, C. Bindal, "Bir SiO2-Na2O Camında Spinodal Ayrışmanın Etkisi", II. Intl. Ceram. Cong. Proceedings Book, Vol.1, October 24-28,(1994)436-444.

8. U. Şen, C. Bindal, F. Yılmaz, " Çeşitli Yenileme İşlemlerine Uğratılan SAE4140 Tank Palet Çeliklerinin Özellikleri", 6. Denizli Malzeme Sempozyumu, Denizli, Nisan (1995) 70-75.

9.Y. Yalçın, Ö. F. Yenihayat, A. Özel, C. Bindal, "Ostenitleme Sıcaklığının Ostemperlenmiş Küresel Grafitli Dökme Demirin Darbe Direncine ve Sertliğine Etkisi" 6. Denizli Malzeme Sempozyumu, Denizli, Nisan 12-14 (1995)87-94.

10. A. Erdemir, G. R. Fenske, F. A. Nichols, C. Bindal, "Sliding Friction and wear performance of Duplex DLC/TiC, DLC/TiN and DLC/Diamond Coatings on Steel and SiC", 50th Society of Tribologist & Lubrication Engineers(STLE) Annual Meeting, Chicago, May (1995).

11.U. Şen, F. Fındık, C. Bindal, "Bir Mg-Al Alaşımına Uygulanan Yaşlandırma Isıl İşleminin Mekanik Özelliklere Etkisi", First Intl. Aerospace and Advanced Technologies Symposium", Istanbul, March 8-10, (1995)387-392.

12.U. Şen, C. Bindal, F. Yılmaz, "Termokimyasal Yöntemle Bor Kaplama ve Kaplama Özellikleri", 8th Intl. Metallurgy and Materials Congress, Istanbul, June 6-9 (1995)385-389.

13. C. Bindal, A. H. Üçışık, " Effect of alloying Elements on The Properties of Boride Coated layer in Steel" Intl. Conf. On Metall. Coat. And Thin Films (ICMCTF), San Diego, CA, USA, (1996).

14.A. Erdemir, C. Bindal, G. R. Fenske and C. Zuiker, "Characterization of Transfer Layers Forming on Surfaces Sliding Against Diamondlike Carbon", Intl. Conf. On Metall. Coat. And Thin Films (ICMCTF), San Diego, CA, USA, (1996).

15. A. Erdemir, C. Bindal, C. Zuiker and E. Savrun, "Tribology of Naturally Occurring Boric Acid Films on Boron Carbide", Intl. Conf. On Metall. Coat. And Thin Films (ICMCTF), San Diego, CA, USA, (1996).

16. C. D. Zuiker, A. R. Krauss, D. M. Gruen, R. Csencsits, A. Erdemir, C. Bindal and G. Fenske, "Physical Properties of Diamond Films Grown from Fullerene Precusors", Intl. Conf. On Metall. Coat. And Thin Films (ICMCTF), San Diego, CA, USA, (1996).

17.C. Bindal, A. H. Üçışık, "İnsan Femur, Tibia ve Fibula Kemiklerinin Mekanik Özellikler", Biyomedikal Mühendisliği Ulusal Toplantısı, BIYOMUT 96, İstanbul, Ekim 21-22, (1996)16-19.

18. I. Üçok, C. Bindal, A. H. Üçışık, "Amputasyon Sonrası Geçen Zamanın Aynı İnsana ait; Femur, Tibia ve Fibula Kemiklerinin Özelliklerine Etkisi", Biyomedikal Mühendisliği Ulusal Toplantısı, BIYOMUT 97, İstanbul, Ekim 13-14, (1997)62-66.

19.C. Bindal, A. H. Üçışık, " Effect of Manganese on The Properties of Borided Low alloy Steels", 9th Intl. Metallurgy and Materials Congress, Istanbul, June 11-15, (1997)397-403.

20.Ş. Şen, C. Bindal, "AISI 8620 Sementasyon Çeliğinin Bor Kaplanması", 9th Intl. Metallurgy and Materials Congress, Istanbul, June 11-15, (1997)419-424.

21. Ş. Şen, C. Bindal, "Some Mechanical Properties of Borided AISI 8620 Steels", TMS Annual Meeting, San Antonio, Texas, February 15-19, (1998).

22.C. Bindal, M. Usta, A. H. Üçışık, "Mechanical Properties of Boride Types Ceramics Formed on The Surface of AISI 1040 Steel", The American Ceramic Society 100th Annual Meeting & Exposition Abstracts, Cincinnati, Ohio, May 3-6,(1998)320.

23.Ş. Şen, I. Özbek, U. Şen and C. Bindal, "Mechanical Properties of Borided Cold Work Tool Steels", IV. Intl. Ceramic Congress, Eskişehir, Turkey, September (1998)739-744.

24. C. Bindal, M. Usta and A. H. Üçışık, "Mechanical Properties of Borides Formed on The Surface of AISI 1040 Steel", IV. Intl. Ceramic Congress, Eskişehir, Turkey, September (1998)745-751.

25. Ş. Şen, M. Usta, C. Bindal, A. H. Üçışık, " Mechanical Behaviour of Non-Oxide Boride Type Ceramics Formed on The AISI 1040 Plain Carbon Steel", The 3rd Intl. Meeting of Pacific Rim Ceramic Societies, Kyongju, Korea, September 20-23, (1998).

26. I. Özbek, C. Bindal, " Borlama ile Yüzeyi Sertleştirilen AISI W4 takım Çeliğinin Bazı Mekanik Özellikleri", IV. Intl. Ceramic Congress, Eskişehir, Turkey, September (1998)753-760.

27. I. Özbek, M. Usta, C. Bindal and A. H. Üçışık, " The Effect of Boronizing Medium Properties of Borided AISI 316L Stainless Steel", The First China Conference on High-Performance Ceramics, Beijing, China, October 31-November 3, (1998) 598-601.

28. Aslı Tuğluoğlu, C. Bindal and A. H. Üçışık, "Al2O3_Takviyeli Polymetilakrilit (PMMA) Dişçilik İmplantlarının Bazı Özellikleri", Biyomedikal Mühendisliği Ulusal Toplantısı, BIYOMUT 98, İstanbul, Ekim 12-13, (1998)116-119.

29. İ. Üçok, C. Bindal and A. H. Üçışık, "Some Mechanical Properties of Human Bones: Femur, tibia and fibula", NZKSEM'99 The First New Zealand-Korean Seminar on Engineering Materials, Feb. 1-3, 1999, University of Waikato, Hamilton, New Zealand.

30. I. Ucok, S. Zeytin, C. Bindal and A. H. Ucisik, Mechanical Properties of Human Bones; Femur, tibia and fibula, 2nd International Conference Composites at Lake Louise'99, Lake Louise, Canada, Oct.31-Nov.5, 1999.

31.Ş. Şen, C. Bindal, "AISI 5410 çeliğinin yüzeyind oluşan borürlerin bazı özellikleri", Bilim Günleri, Denizli, 5-7 Mayıs, 1999.

32.U. Şen, Ş. Şen, C. Bindal, F. Yilmaz, "Borlanmış AISI D2 , AISI4140 Çeliklerinin Yüzey Özelliklerinin Kıyaslanması", Bilim Günleri, Denizli, 5-7 Mayıs, 1999.

33. H. Akbulut, C. Bindal, "Effect of substrate temperature on the properties of Ni coating produced by plasma assisted deposition", The Coating 1st International Conference, Thessaloniki, Greece, Oct. 14-15, 2000.

34. I. Ozbek, H. Akbulut, C. Bindal, A. H.Ucisik, "The characterization of borided 99.5% purity nickel", The Coating 1st International Conference, Thessaloniki, Greece, Oct. 14-15, 2000.

35. I.Özbek, S. Sen, M. Usta, O. El-Maari, C. Bindal, A. H. Ucisik, "Characterization of Boronizing of AISI 316L Austenitic Surgical Stainless Steels", The Fourth Asian Symposium on Biomedical Materials, December 1-3, 1999, Singapore.

36.F. Gumusburun, B.A. Konduk, C. Bindal, S. Zeytin, A. H. Ucisik, An Evaluation of Alumina-Zircon Ceamics As Biomaterials, Austceram 2000 Conference, Sydney, Australia, June 25-28, 2000.

37. I. Özbek, S. Sen, M,Usta, C. Bindal, A. H. Ücisik, "Characterization of Boronizing of AISI 316L Austentic Surgical Stainless steel" , The 24th Annual Cocoa Beach Conference & Exposition: Cocoa Beach, Florida, January 23-28, 2000.

38. I. Özbek, S. Sen, M.Usta, C. Bindal, A. H. Ucisik, Some Properties of Boronized AISI 440C Stainless steels, 10th International Metallurgy and Materials Congress, Istanbul-Turkey, May 24-28, 2000.

39. R. Artır, Y. Karakas, C. Bindal. "Processing of Dental Implant with Improved Properties" The 24th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures: B , (Edited by T. Jessen and E. Ustundag), Ceramic Engineering and Science Proceedings, Vol. 21. Issue 4, (2000) 431-437.

40.R. Artır, C. Bindal ve A. M. Kılıç, "Üçlü Faz Diagramlarının Bilgisayarda Modellenmesi", 10th Intl. Metallurgy and Materials Congress, May 24-28, (2000) 1329-1336.

41. A. H. Ucisik, S. Zeytin, C. Bindal, The Boride Coating on Iron Based Alloys, Austceram 2000 Conference, Sydney, Australia, June 25-28, 2000.

42. I. Ucok, S. Zeytin, C. Bindal B.A. Konduk and A. H. Ucisik, Mechanical Properties of Human Bones; Femur, tibia and fibula, Proc. Of International Conference on Engineering and Technological Sciences 2000-International Symposium on advanced Materials, Beijing, China, Oct.11-13, 2000.

43.S. Baspinar, S. Taktak, A. Altun, C. Bindal, Some Properties of SiC-Mullite Refractory Composite Produced from Recycled SiC, The 25th Annual International Conference on Advanced & Composites, Cocoa Beach, Florida, January 21-26, 2001.

44.M. Ipek, O. Ozdemir, S. Zeytin, C. Bindal, Titanium deposition on high carbon steel by pack cementation, 2nd International Conference The Coatings in Manufacturing Engineering, Hannover-Germany, May 9-10, 2001.

45.S. Zeytin, C. Bindal, B. A. Konduk, A. H. Ucisik, An Evaluation of Human Articular Cartilage On Femoral Head, International Conference on Materials for Advanced Technologies, 1-6 July, 2001, Singapore.

46. Ş.Yılmaz, R. Artır, Y. Karakaş, C. Bindal, "Basalt Based Glazes and Their Industrial Applications", V. Ceramics Congress With International Participations, Turkey, Oct.3-5, (2001)206-211.

47.Ş. Şen, U. Şen, Ş. Yılmaz, ve C. Bindal, "Borlanmış AISI 4140 Çeliğinin Yüzeyinde Oluşan Seramik Karakterli Borürlerin Kırılma Tokluğu" V. Ceramics Congress With International Participations, Turkey, Oct.3-5, (2001) 325-331.

48. S. Zeytin, B. A. Konduk, M. Ipek, C. Bindal, A. H. Ucisik, Mechanical Behaviour of Human Articular Cartialge on Femoral Head, 9th International Symposium on Biomedical Science and Technology, Sept.19-22, Kemer, Antalya-Turkey, 2002.

49. Ş. Taktak, B. Emrullahoğlu, Ş. Yılmaz, C. Bindal, Si3N4 Seramiğinin Aşınma ve Sürtünme Davranışı, 9. Denizli Malzeme Sempozyumu, 8-10 Mayıs, 2002.

50. Ş. Şen, U. Şen, C. Bindal, "The Kinetics Boride Layer Formed on Surface of AISI 4140 Steel", Eight Conference & Exhibition of The Europpean Ceramic Society, 29 June-3 July 2003, İstanbul, Turkey.

51. Ş. Yılmaz, S.C. Okumuş, A. Ş. Demirkıran, C. Bindal, "Fly Ash Based Spray Coatings", Eight Conference & Exhibition of The Europpean Ceramic Society, 29 June-3 July 2003, İstanbul, Turkey.

52. Ş. Taktak, R. Artır, Ş. Yılmaz, C. Bindal, " Fracture Toughness of Alumina_Mullite Composites Produced by Infiltration Process", Eight Conference & Exhibition of The Europpean Ceramic Society, 29 June-3 July 2003, İstanbul, Turkey.

53. I. Özbek, S. Zeytin, Ş. Yılmaz, C. Bindal, A. H. Üçışık, " Development of Surface Properties of Materials by Using Boron Minerals", Industrial Minerals and Building Stones, Sept. 15-18, 2003, İstanbul, Turkey.

POSTERLER

1. C. Bindal, and A. H. Üçışık, " The Effect of Alloying Elements on the Boronizing of Carbon and alloy Steels", European Materials Research Society, Strasburg, France, may 29-June 1, (1990).

2. A. H. Üçışık, C. Bindal, Boronizing of an Impurity Controlled Steel" Intl. Conference on Surface Engineering, Bremen, Germany, March, (1993).

3.A. Erdemir, C. Bindal, G. R. Fenske, C. D. Zuiker, D. M. Gruen, and A. R. Krauss, "Tribological Characterization of Nanocrystalline Films", 3rd Intl. Conference on The Applications of Diamond and Related materials, Maryland, USA, (1995).

4.A. Erdemir, G. R. Fenske, C. Bindal, C. Zuiker, A. R. Krauss, D. M. Gruen, "Ultralow-Friction and Wear Properties of Smooth Diamond Films Grown in Fullerene Argon Plasmas", The 6th European Conference on Diamond, Diamond-like and Related Materials, Barcelona, Spain, September (1995).

5. M. Karamehmetoglu, C. Bindal, A. H. Ucisik, "The Effect of Meniscus on The Knee Joint", The First Joint Meeting of Biomedical Enineering Society (BMES) and Engineering in Medicine and Biology Society (EMBS), Hyatt Regency, Atlanta, GA, USA, Oct. 13-16, 1999.

6.A. Tugluoglu, C. Bindal, A. H. Ucisik, "Al2O3-reinforced Polymethylacrylate (PMMA) for Medical Applications", Advanced Materials With Biomedical Applications, International Symposium, National Institute of Standards and Technology, Gaithersburg, Maryland, USA, June 7-8, 1999.

7. F. Gumusburun, B. A. Konduk, S. Zeytin, C. Bindal, T. Altug, A. H. Ucisik, "A Study on Alumina-Zircon Ceramics as Biomaterials", Sixth World Biomaterials Congress, Kamuela, Hawaii, USA, May 15-20, 2000.

8. C. Bindal, A. H. Ucisik, "Boriding of 0.3%C, 0.02%P Plain Carbon Steel", The 2001 Joint International Conference of The 4th Japan-Korea Symposium on Plasma and Thin Film technology, Nagoya Congress Center, Nagoya, Japan, October 28-November 1, 2001.

9.R. Artır, Ş. Yılmaz, C. Bindal, "Some Properties of B2O3 Added Fly Ash" Eight Conference & Exhibition of The Europpean Ceramic Society, 29 June-3 July 2003, İstanbul, Turkey.

PATENTLER

1.D. M. Gruen, A. R. Krauss, A. Erdemir, C. Bindal, C. D. Zuiker, " Smooth Diamond Films as Low Friction, Long Wear Surface", AN-95-111, USA, August, (1995).

2. A. Erdemir, G. R. Fenske, C. Bindal, " Method to Produce Ultra-low Friction Layers on Borided Steel Surfaces", September (1995).

ANASAYFA