This Hu Unlooping release was made available to you from No1be4me on the Pirates Den at http://www.pirateden.com

It offers some signifigant advantages over mondays outstanding Unatester release.  A new Hu Unlooping Atmel software has been incorporated into the 7F5C code, meaning that it is basically a 3-in-1 release.  It can be fully used efficiently in ExtremeHu for routine operations, including taking full advantage of ExtremeHu 2.xs latest features, it can help unlock dealer locked cards and now it can also unloop damaged Hu cards as well with the special script.  This means you can now do everything using one Code. No more popping chips off or switching between loaders.


The new unlooping release also now minimizes Hu loader griefs by allowing more loader models to unloop cards.  It streamlines the unlooping process by helping to automate the glitching cycles and is possibly more efficient at unlooping really stubborn cards than mondays release.

As is the true spirit of freeware, this release is also an independant release and not Leakware.  You should use it to your full advantage and learn everything you can from it.  This is what the true spirit of freeware is all about, learning, sharing and contributing.  Freetv is NOT the motivating factor behind true freeware, it is the byproduct of shared knowledge, which is a far cry from leaked dealer 3m files which some people call freeware.

This should definately help clear the way for a future all in one ExtremeHu style utility that can handle all aspects of the Hu card.

Any questions and comments regarding this release should can voiced on your favorite discussion forum.    Please confine your questions to existing topic discussions to avoid unneccessary duplication.

This release was originally released on the Pirates Den and we encourage other sites to also make it available to encourage more free and independant thoughts and contributions.

Well here it is another FREEWARE unlooper for your unlooping pleasures. Why?  Hell, why not!  The objective of this unlooper release is to demonstrate that there is more than one way to unloop an HU card and to provide options to the hobby.  This unlooper script should work on most unmodified loaders. 

The name of this package is UL4S and stands for UnLoop for Sure. There are no user selectable features because the script attempts to locate the ATR glitch point at random. This convenience comes at the price of unlooping speed but it is the only way I can guaranty that the script will be capable of unlooping any HU card regardless of card version. 

The script may find the ATR glitch point in less than 1 minute or it may take as long as 1 hour. I don't claim speed. What I do claim is success rate independent of hardware. HU unlooping is very hardware dependent. What works great on one loader or ex-H unlooper will refuse to work on a similar model. That is the biggest issue with the freeware unloopers.  The commercial unlooper on the other hand uses this problem as an advantage to milk the unsuspected with all sorts of outrageous claims. Read the following very careful! IF THE UL4S OR THE UNATESTER UNLOOPER CAN'T FIX YOUR CARD THE COMMERCIAL UNIT PROBABLY WONT FIX IT EITHER. I don't know what all the hype in speed is, but the casual tester doesn't need to unloop cards every 30 seconds. If you need that kind of performance then shell out the 2 grand or whatever, because you my friend, are nothing more than a wannabe dealer. 

The approach I took to the unlooper hardware dilemma was to make everything randomly generated. All the delays and DACs will be generated randomly. On every attempt to lock on the ATR glitch point, and if possible the script will attempt to install the bootlaoder. There are no modifications that are needed to use this script. If you can use HU extreme and load a card under 10 attempts this script will probably work for you. 

I do recommend one small modification that will improve the overall performance of the loaders in general. This mod will also eliminate the need to be adjusting the power supplied to the loader. Locate the small 8-pin chip (the only one on the loader board) make sure it is a LM358. Some old H unloopers had the MC1458 variety. Cut the trace leading to pin 8 and feed pin 8 of the LM358 with 5v from the 5v regulated supply. If you didn't understand what the hell I just said then don't worry about it as this script should work for you anyway. I also recommend the unatester modifications they work to improve the overall performance of your loader as well.

what's included in the release.

The modified 5C7F script to include the unlooper option

UL4S.HEX	Atmel flash in Intel hex
UL4S.BIN	Atmel flash in Binary format
UL4S.EXE	Unlooper flashing utility of the UL4S Atmel code

Note the code is backward compatible with HU extreme.


How to use...

Load and run it like any other script. If you don't know how to do that then this script isn't for you. Insert your looped card and click the unloop button. You will be prombted to select a .bin to load the card with once the bootloader is active. The ATR of the fixed card will then be displayed. That's all to it! enjoy.... 

If this doesn't work for you sorry. It works for me. BTW all the standard disclaimers do apply. No one but you is responsible of what you do with this software package. If you blow up your house, car, computer or card it is your fualt not mine.

Greets to the little boys from Santiago you know who you are. 

Special greets to the unatester thanks man good job!

No1b4me

