Faster Unlooping
-----------------

Unlooping with UL4S and Extreme HU 3.1 can be optimized.

Better results can be had with many unloopers by utilizing the
method used by HUFF to FF the cards as the 1st step.

I've included a WinExplorer Script that works with UL4S to FF
the card and should be used prior to unlooping.

-- FFHU.XVB -- Note: No LED activity during the FFing process. 

Here is a Step by Step.

1) Insert card into the Unlooper
2) Load FFHU.XVB into WinExplorer and execute the script
3) Execute ExtremeHU (unlooper flashed with UL4S)
4) Choose card/unloop card
5) Select the preset ranges you have the best success with
   (I have success with alternate 2. Your results will vary)
6) Check automatically update custom ranges (offset value 2)
7) Click save then execute


When you card unloops, Extreme HU will save the ranges +or- 
the offset value you have chosen(2) to the custom ranges.
ExtremeHU, in effect, learns the ranges that work best. The 
next time you unloop, use the custom range that extremeHU 
created. You can experiment with these options to determine
what works best for you. You results will depend on your
unlooping hardware and card. 

If you don't have success unlooping in 2-5 minutes, then 
repeat the process. 1st with the custom ranges, then with
the standard or alternate ranges.

I've been able to go from an average of 10 minutes to 2 minutes,
sometimes as little as 20 seconds.

Please post you results here so we can see how this is working !!

FS
