#include<graphics.h>
#include<dos.h>
#include<d:\turboc3\sameer\mouse.h>

 int maxx,maxy,x,y,button,bulb1=2,bulb2=2,bulb3=2,bulb4=2;
 int style=SOLID_FILL,size=5,ang=0,ang1=0,ang2=0,ang3=0;
 int fb1=120,fb2=248;

void main(void)
{
   int gdriver = DETECT,gmode,errorcode;
   initgraph(&gdriver,&gmode, "d:\\turboc3");
   settextstyle(SMALL_FONT,HORIZ_DIR,size);       /*to set a text style*/
   setcolor(3);
   rectangle(0,56,getmaxx(),getmaxy());           /*control panel rectangle*/
   rectangle(0,0,getmaxx(),50);                   /*rectangle for aim*/
   line(1,82,getmaxx()-1,82);                     /*line under heading*/
   setviewport(1,57,getmaxx()-1,getmaxy()-1,1);
   gotoxy(26,2);
   printf("ELECTRICAL EQIPMENT CONTROL USING PC");    /*aim of project*/
   style=SOLID_FILL;
   gotoxy(32,5);
   printf("CONTROL PANEL");
   outportb(0x378,0);                   /*making initialy all bulbs off*/

   if(initmouse()==0)
   {
    closegraph();
    restorecrtmode();
    printf("Mouse Driver not loaded\n");
    exit(1);
   }
   restrictmouseptr(1,57,getmaxx()-1,getmaxy()-1);
   showmouseptr();

   equip(170,100,10,15,0);                    /*for bulb1*/
   equipbase(164,110,176,120);

   equip(95,85,10,35,0);                    /*for tube*/
   equipbase(85,110,105,120);
   equipbase(85,50,105,60);

   setcolor(14);
   circle(28,85,25);                /*for fan*/
   circle(28,85,5);
   sector(28,85,75,105,25,25);
   sector(28,85,210,240,25,25);
   sector(28,85,300,330,25,25);
   equipbase(25,110,28,115);
   equipbase(18,115,35,120);

   equip(238,100,10,15,0);                  /*for bulb2*/
   equipbase(232,110,244,120);

   equip(320,100,10,15,0);                  /*for feedback*/
   equipbase(314,110,326,120);

   cleartext(0,180,637,365,3);		     /*lower box */
   putbuttons();			     /*put all the buttons*/
   while(1)
   {
   getmousepos(&button,&x,&y);
   gotoxy(65,2);
   printf("X=%d\tY=%d\n",x,y);
   checkstat();
    if(bulb1%2==1)
    {
      equip(28,85,25,25,0);                /*for fan*/
     equip(28,85,5,5,0);
     setfillstyle(style,14);
     sector(28,85,ang1+30,ang1+60,25,25);
     sector(28,85,ang2+120,ang2+150,25,25);
     sector(28,85,ang3+255,ang3+285,25,25);
     equip(28,85,25,25,0);                /*for fan*/
     equip(28,85,5,5,0);
     ang1=ang1+20;
     ang2=ang2+20;
     ang3=ang3+20;
    }

   }
   getch();
   closegraph();
}
/*method for checking status of mouse click*/
checkstat()
{

 int button,x,y,a,res;
 getmousepos(&button,&x,&y);
 /*for exit*/
 if( (button & 1)==1 && x>=550 && x<=630 && y<=457 && y>=433)
 {
  delay(300);
  exit(1);
 }
   /*for fan*/
 if( (button & 1)==1 && x>=6 && x<=68 && y<=213 && y>=176)
 {
     res=inportb(0x378);
     res=res^1;
     outportb(0x378,res);
    /* moveto(20,30);*/
    /* printf("signal=%d from computer",res);*/
     res=res&1;
     if(bulb1%2==0 && res==1)
     {
      cleartext(5,125,70,155,6);
      setcolor(10);
      outtextxy(15,129,"FAN ON");
      fb1=248;                          /*for on signal*/
      fb2=120;                          /*for off signal*/
     }
     if(bulb1%2!=0 && res==0)
     {
      cleartext(5,125,70,155,6);
      setcolor(10);
      outtextxy(15,129,"FAN OFF");
      equip(28,85,25,25,0);                /*for fan*/
      equip(28,85,5,5,0);
      setfillstyle(style,14);
      sector(28,85,ang1+75,ang1+105,25,25);
      sector(28,85,ang2+210,ang2+240,25,25);
      sector(28,85,ang3+300,ang3+330,25,25);
      fb1=120;                               /* for on signal*/
      fb2=248;                               /*for off signal*/
     }
     bulb1++;
     delay(300);
  }
  /*for tube*/
 if( (button & 1)==1 && x>=75 && x<=125 && y<=213 && y>=176)
 {
     res=inportb(0x378);
     res=res^2;
     outportb(0x378,res);
     /*moveto(20,30);*/
     /*printf("signal=%d from computer",res);*/
     res=res&2;
     if((bulb2%2==0) && (res==2))
     {
      equip(95,85,10,35,15);
      equipbase(85,110,105,120);
      equipbase(85,50,105,60);
     }
     if(bulb2%2!=0 && res==0)
     {
      equip(95,85,10,35,0);
      equipbase(85,110,105,120);
      equipbase(85,50,105,60);
     }
     bulb2++;
     delay(300);
 }
 /*for bulb1*/
 if( (button & 1)==1 && x>=145 && x<=206 && y<=213 && y>=176)
 {
     res=inportb(0x378);
     res=res^4;
     outportb(0x378,res);
     /*moveto(20,30);*/
     /*printf("signal=%d from computer",res);*/
     res=res&4;
     if(bulb3%2==0 && res==4)equip(170,100,10,15,14);
     if(bulb3%2!=0 && res==0)equip(170,100,10,15,0);
     bulb3++;
     delay(300);
 }
 /*for bulb2*/
 if( (button & 1)==1 && x>=215 && x<=260 && y<=213 && y>=176)
 {
     res=inportb(0x378);
     res=res^8;
     outportb(0x378,res);
     /*moveto(20,30);*/
     /*printf("signal=%d from computer",res);*/
     res=res&8;
     if(bulb4%2==0 && res==8)equip(238,100,10,15,14);
     if(bulb4%2!=0 && res==0)equip(238,100,10,15,0);
     bulb4++;
     delay(300);
 }
   /*for feedback*/
 if( (button & 1)==1 && x>=285 && x<=360 && y<=213 && y>=176)
 {
     a=inportb(0x379);
     moveto(20,30);
     printf("signal=%d from computer",a);
     if(a==fb1)equip(320,100,10,15,14);
     if(a==fb2)equip(320,100,10,15,0);
     delay(300);
  }
   /*for info*/
   if( (button & 1)==1 && x>=26 && x<=76 && y<=457 && y>=431)
   {
   cleartext(0,180,637,365,3);
   setcolor(14);
   settextstyle(TRIPLEX_FONT,HORIZ_DIR,1);       /*to set a text syle*/
   outtextxy(55,190,"MINIPROJECT ELECTRICAL EQUIPMENT CONTROL USING PC");
   outtextxy(60,215,"* This software is completely designed by our group.");
   outtextxy(60,240,"* GROUP-SAMEER,PARAS & MURTAZA.");
   outtextxy(60,265,"*If any more info required contact on 4213727.");
   delay(300);
   settextstyle(SMALL_FONT,HORIZ_DIR,size);       /*to set a text syle*/
   }
   /*for help*/
  if( (button & 1)==1 && x>=126 && x<=176 && y<=456 && y>=432)
 {
  cleartext(0,180,637,365,3);
  setcolor(14);
  settextstyle(TRIPLEX_FONT,HORIZ_DIR,1);       /*to set a text syle*/
  outtextxy(55,190,"HELP");
  outtextxy(60,215,"* Click on BULB1/BULB2 for making bulbs ON/OFF");
  outtextxy(60,240,"* Click on tube to make tube on");
  outtextxy(60,265,"* Click on FAN OFF to make fan ON");
  outtextxy(60,290,"* Clear button clears the text in lower window");
  delay(300);
  settextstyle(SMALL_FONT,HORIZ_DIR,size);       /*to set a text syle*/
 }
  /*for clear*/
  if( (button & 1)==1 && x>=226 && x<=276 && y<=456 && y>=432)
  cleartext(0,180,637,365,3);
  return 0;
}
/*method for putting buttons*/
putbuttons()
{
 setcolor(3);
 line(0,180,640,180);	     /*for dividing screen in two parts*/
 setcolor(6);
 rectangle(25,400,75,375);		  /*for info */
 rectangle(125,400,175,375);     	  /*for clear*/
 rectangle(225,400,275,375);		  /*for help*/
 rectangle(550,375,630,400);              /* for exit*/
 rectangle(5,125,70,155);                /*for fan */
 rectangle(80,125,125,155);           /*for tube*/
 rectangle(145,125,187,155);           /*for bulb1*/
 rectangle(215,125,260,155);            /*for bulb2*/
 rectangle(285,125,360,155);           /*for feedback*/

 setcolor(10);
 outtextxy(11,129,"FAN OFF");
 outtextxy(85,129,"TUBE");
 outtextxy(150,129,"BULB1");
 outtextxy(220,129,"BULB2");
 outtextxy(30,374,"INFO");
 outtextxy(130,374,"HELP");
 outtextxy(230,374,"CLEAR");
 outtextxy(570,374,"EXIT");
 outtextxy(290,129,"FEEDBACK");
 return 0;
}
/* method for drawing circles in equipment*/
 equip(int x1,int y1,int a1,int b1,int c)
 {
   setcolor(14);
   setfillstyle(style,c);
   fillellipse(x1,y1,a1,b1);
 }
/* method for equipment base*/
 equipbase(int x2,int y2,int a2,int b2)
 {
   setcolor(8);
   setfillstyle(SOLID_FILL,8);
   bar3d(x2,y2,a2,b2,0,0);
 }
 /*method for clearing text*/
 cleartext(x3,y3,a3,b3,c1)
 {
  setcolor(c1);
  setfillstyle(style,0);
  bar3d(x3,y3,a3,b3,0,0);
 }