 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Previous Page |
|
|
|
Week 5: For the 5th week I went over some of the source codes for the comblock console. I was specifically looking for the resgisiter setting methods that allowed the console to set the freq. registers of the comblocks. When I put the comblock console documents on my computer my Dev C++ compiler picked up some source codes. When I compiled them I got no errors. Then when I tried to run them this socket error keeps on appearing. The console has a client and server section which I believe is where I will find me answer. |
|
|
|
|
 |
|
|
|
|
|
Jackson State University Engineering Dept. |
|
|
|
|
|
|
Week 6: During week 6 I found a document about the client server establishment for the socket connection. After reviewing that document and one of my old cleint server programs. I saw that the problem lied in the IP address section. I addressed the situation and inputed my IP address in the c++ compiler on my computer. Also i altered some of the code to replicate that of my old client server prog. |
|
|
|
|
 |
|
|
|
|
|
|
Comblock console |
|
|
|
Week 7: During week 7 I was still facing the problem of making the visual basic Comblock Console go mobile. From reading the previous groups Pdf file and viewing the source codes they had also. I had came up with some ways to try to fix the problem. This week I was able to do the trial and error part and find out which method actually worked. |
|
|
|
|
 |
|
|
|
Library files |
|
|
|
|
|
|
|
|
|
MSWINSCK.OCX |
|
|
|
|
|
|
Week 8: Last week I was able to test to full the extent whether the console program could be pulled up on any computer and still function with the comblocks. Installed the console on various computer. Thanks to all the participants. I Enjoyed a dance with an 81 year old beautiful lady on a cruise that i will never forget. I started putting 2 and 2 together to get 4 with my Powerpoint presentation ready for next week. |
|
|
 |
|
|
|
|
|
|
 |
|
|
|
Week 9: This past week I spent about 70 percent of my time getting ready for my Prostate Cancer Presentation. I looked over more documentation and made modifications to me PPP. I also started on getting me final report prepared. I ran some more test with the comblocks and backed up setting. I ran some test with the spectrum analyzer and the transmitter, working with the comblock console. |
|
|
|
|
|
Week 10: During this week I was able to get the transmitter back in correspondence with the frequencies in the registers. After running some test with the spectrum analyzer to assure myself that the transmitter was working properly. I attempted to use the comblock console to changes frequencies but ran into a problem. Also I gave a presentation on prostate cancer. And continued work on my final report. |
|
|
 |
|
|
|
|
