|
|
Parts List
- Davies-Craig EWP Electric Water Pump
- Davies-Craig EWP Controller (optional)
- Modified Saab 99 b-engine expansion tank hose that runs
from the expansion tank to the waterpump cover and includes a heater
hose
junction.
- Metal freeze plug for the lower waterpump cavity in the
engine block. Dorman #555-093 is a perfect fit.
- Expandable (rubber) freeze plug for the upper waterpump
cavity in the engine block.
- Two 5/8" plastic T-connectors for the cooling
system/heater hoses. Can be found in good auto parts stores.
- A plastic "cap" to seal off the small port on
the original waterpump cover. Dorman #495-100 "bypass
cap" is a perfect fit.
- Several new hose clamps and plastic wire-ties.
- Loctite #518 Gasket Sealant.
- A variety of replacement heater and radiator hose.
|
|
| A variety of radiator and heater hoses from
the local auto parts store. |
|
|
|
| Stock 99 expansion
tank hose modified
by cutting off the curved end. |
|
|
| Freeze plug #555-093
to seal the lower waterpump cavity. |
 |
| Expandable rubber freeze
plug used to seal the upper waterpump cavity |
|
| Rubber cap #495-100
to block the small port on the waterpump cover. |
|
