For Sale: Aluminum Replica Porsche 550 Parts
1. Inner rear bonnet panel with tail prop $1995. (only two left) - This panel can be installed by the owner by using tin snips for simple trimming and pop rivet gun for installation. The tail prop bracket that mounts to the frame of the car will have to be fabricated for the individual car.
2.
Tail prop $350 (10 left). It self locks and releases. - Owner must fabricate
a bracket to be bonded to the inner-body and one bracket to the frame
of the car for installation.
3. Inner door panels $800 a pair (10 sets left). These are only the
inside skins, you will need to glue them in. - Pop riveted AND glued.
These panels are copies of the production 550's with the same roll-radius
and are virtually flawless and fit like a glove.
4. Gas tank, made in Australia. Need a minimum order for six for this
price - $2750 each.
Tank includes the filler neck, cap and tank straps. - And baffled. They
require some cutting of fiberglass and a metal platform to replace the
existing tank platform. Would need to know whether the tank would be for
a Beck or a vintage Spyder.
Installation
is availabel for any of the panels. Call Gregory from Vintage Metal Design in Ventura, California at 805-477-0354 for details. Just call for prices, doors can be shipped
for installation.
|
1
|
2
|
||
 |
 |
 |
 |
|
3
|
4
|
||
 |
 |
||