Covering
Those Controls
A
function of speed, not style
If
you have read some of my other articles you know that I am a
strong advocate of covering the front brake lever while I've been
essentially quiet about whether or not you should cover your
clutch lever while riding.
Further,
you probably know that I prefer to use two fingers to cover my
brake and, when I do cover my clutch, I prefer to cover it using
all four fingers. So, what's the deal? What's the logic that
explains these differences?
First,
let's look at why we cover a lever. Whether it's the brake
or the clutch, the ONLY reason we cover these controls is to
reduce reaction time when we need to operate them. In exchange for
reduced reaction time we pay a price - we have less control of the
corresponding grip when some of our fingers are covering a lever
instead of being in contact with that grip.
The
next question is not as obviously answered as the first one: When
should you cover those controls? The answer is that we cover them
whenever we might have need to quickly use them, but NOT when
quick usage of the control (or simply covering it) can be
dangerous.
The
brake lever is the one that most of us cover virtually all the
time. Is there a time when it should NOT be covered? You bet. At
slow speeds, particularly when making turns. In these cases the
use of your front brake is often so counter-productive or
dangerous that you are far better off having the fingers of your
right hand wrapped around the throttle.
Another
time you want to keep your fingers off the brake lever is when you
are about to surmount an obstacle in the road. If you take a firm
jolt to the front or back wheel you must not lose your hold on the
grip and having all of your fingers wrapped around it is your best
insurance against that happening.
So,
it follows that in general you want to cover your front brake
lever anytime you might have to stop quickly. In other words,
almost always if your motorcycle is moving faster than you can
run.
But
should you cover it with two fingers? Three? Four?
The
answer to that question raises no end of controversy amongst
seasoned riders. I suggest that you use as many fingers as you are
comfortable using over an extended period of time. In my case, I
use two fingers. If I try to use three, my hand gets cramped as I
try to maintain the other one in contact with the grip. If I use
four fingers then without a wrist rest to give me positive control
of my throttle I find myself unable to smoothly control speed and
my thumb will cramp over time. Since the right grip is itself a
control (throttle), it is my preference to use two fingers to
cover the brake lever and two to maintain contact with the
throttle. Further, using two fingers GREATLY reduces the odds that
in a panic I might try the dangerous practice of 'grabbing
a handful' of brake.
When
to cover your clutch lever is a little more subtle than when to
cover your front brake lever. However, since the left grip is not
itself another control, when you do cover the clutch you should
use all four fingers. And, of course, the clutch lever can be
squeezed until it contacts the grip. That means that if you use
less than four fingers to cover the lever you can trap the other
fingers between the lever and the grip.
The
clutch is not used simply to disengage power from the rear wheel.
Its friction zone is used to act like a vernier control of speed
and it is far more subtle in doing that job than the throttle is,
particularly at slow speeds. Thus, covering the clutch makes sense
at slow speeds.
At
higher speeds, however, covering the clutch is essentially
useless. The price you pay to cover the clutch at higher speeds is
a diminished control of the left grip. Since the brake lever
should be covered when traveling at any reasonable speed, it makes
sense to me that the clutch should not.
And,
like the brake lever, the clutch should NOT be covered if you are
about to surmount an obstacle in the road. This, to minimize the
chance of losing control of the grip altogether.
Cover the clutch at slow speeds
Cover the brake at higher speeds
Return
to
|