Growing list of hopups from what I’ve read in forums, feel free to use.last UpDate 01/03/03

 

* "billet" aluminum motor pod plates

* anodized damper washer shafts

*anodized aluminum or titanium screw sets

* black fiberglass (faux carbon fiber) front suspension plate

* carbon fiber chassis blank

* T-plate black fiberglass

* stronger easy access and pretty aluminum rear pods

* wider blue pretty aluminum rear pods(WWS PRO availabe now from IRC might fit 300 motor??)

* aluminium front end

* titanium front end

* aluminum steering knuckles with teflon inserts

* thinner chassis and t-plate to handle the bumps better

* design for an all aluminum front end with adjustable caster, chamber, and wheel base,

  to mimic a 1/12th racer. It will also require a new chassis to keep the car low.

* aluminum parts and graphite chassis

* chassis mounted antenna mount for a regular antenna

* The infamous blue aluminum screws and nuts on the chassis

* body mounts that are setup for standard hood pins

* electronics pan with ears slotted for a pretty blue fiberglass battery strap that just

  slides through and gets clipped on one side.

* front bumper like the TC3

* aluminium or delrin rear hubs with flats on the axle so you don’t have to carefully adjust the

   rear wheels to get them to run true

* cross brace for the rear pod to keep it square

* Thicker aluminum pod side plates

* T plate that has more flex for the bumpy tracks

* 135mm bodies that would keep the 12th scale tires under the body

* graphite SC18 chassis plates

* aluminum suspension arms

*.080 graphite. Chassis will be set up for saddle packs using 2/3 A cells, mounted real low!  also a L.T.O. version

* horizontal servo mount in aluminum alloy , attaches with set screws to the servo and stainless steel screws to the chassis.

* sliding 2/3A battery tray

*A piece of graphite to go across the front end kingpins. this would allow racers to stiffen up the front a plate

* screw tweaking system

* the PRO Chassis

* the * dillon tweak system(3 shocks)

 

pic 1 AL custom motor pod   Using purple ones motor may be unprotected, so maybe silver would do best.	pic 2 AE Associated RC12LW (Who knows may fit) #4115	pic 3 Full Al Chassis Design may also be made on graphite.
pic 4 GPM or Integy rear pod May work on our cars with some custom mods.	pic 5 DRAGMASTER D1302 1.5" Ultralite Wheels 15.99 Fronts for dragster or funny car	pic 6 Lite Chassis BRP is developing a lite graphite chassis (added some changes)

 

Complaints, suggestions, removing or adding, drop me an email

[email protected]

* My BRP