(Keep your gun clean)

For testing I had a well used A5 and when I removed the cyclone there was still paint between it and the body. The paint must have been there for quite some time but I dont know exactly how long. When I cleaned the halves all the paint that was bubbled up from where the paintball residue had sat came right off. If you don't want your gun loking like this I suggest you kepe it clean..... OR have Spec OPs Dura coat it.

(Burr inside half)

While testing afew A5's I noticed one had a burr on the half that attaches to the cyclone. It rubs on the rear bolt / hammer. When I got my A5 I took it apart to polish the internatls and it had this EXACT same burr. I guess this gun and mine were from the same production run. I used a stone to remove the one in my A5 prior to polishing the internals.

Back To Index