How To Radio Control DC Motors Cheaply
Pin Summary
Input Pins
Pin 1 If it goes low it does a rest (MCLR)
Pin 2 If low it only gives one half of the output to the motors
Pin 6 "VEX" receiver
Pin 7 commands and data from another microcontroller
Pin 33 data interrupt
Pin 11 + voltage
Pin 32 + voltage
Pin 12 ground
Pin 31 ground
Output Pins
Pin 34 P.W.M. for motor 1
Pin 35 High when joystick 1 is left
Pin 36 High when joystick 1 is right
Pin 37 P.W.M. for motor 2
Pin 38 High when joystick 2 is up
Pin 15 High when joystick 2 is down
Pin 16 P.W.M. for motor 3
Pin 17 High when joystick 3 is up
Pin 18 High when joystick 3 is down
Pin 23 P.W.M. for motor 4
Pin 24 High when joystick 4 is left
Pin 25 High when joystick 4 is right
Pin 26 P.W.M. for motor 5
Pin 19 High when joystick 3 is up and top button 5 is press
Pin 20 High when joystick 3 is down and top button 5 is press
Pin 21 P.W.M. for motor 6
Pin 22 High when joystick 4 is left and top button 5 is press
Pin 27 High when joystick 4 is right and top button 5 is press
Pin 28 P.W.M. for motor 7
Pin 29 High when joystick 3 is up and bottom button 5 is press
Pin 30 High when joystick 3 is down and bottom button 5 is press
Pin 8 P.W.M. for motor 8
Pin 9 High when joystick 4 is left and bottom button 5 is press
Pin 10 High when joystick 4 is right and bottom button 5 is press
Pin 14 Stays high when top button 6 is press; goes low when bottom button 6 is press
Pin 5 Tells other microcontroller it can send the next command
Pin 4 Goes high if a command error has been detected
All the other pins are not being used.
The End
Home Page